[KERNEL] [N9005] [4.4.2] CivZ SnapKat_Rev2.7 [02.04.2014]
Page 1 sur 1 • Partagez
[KERNEL] [N9005] [4.4.2] CivZ SnapKat_Rev2.7 [02.04.2014]
[KERNEL 4.4.2][SM-N9005] CivZ-SnapKat
Attention : Cette opération comporte des risques.Ni moi ni le forum ne peut être tenu responsable des éventuels problèmes rencontrés. Pensez à effectuer une sauvegarde avant de suivre ce tuto
SOURCE
Selinux status = Permissive
NTFS R/W support with the use of Paragon (see playstore)
ExFat
XZ compressed
Build in init.d support
DynamicFsync
insecure & adb insecure
Power suspend driver_1.2 @ Faux123
Synapse control added with various options: CPU control; Kernel controls...
Led control_1.1 @ Yank555.lu (Not on the 900T version)
mdnie control_1.3 and synapse support @ Wootever
Faux Sound_3.2 @ Faux123 & Wootever
2.88GHz Maximum overclock (unlock with Synapse app)
TouchBoostdriver Min frequency locked = no more jumping to 1.1GHz as minimum frequency
Voltage control thanks to myfluxi & synapse voltage control thanks to wootever. (Not on the 900T version)
Intelli HotPlug_2.0 & ECO Mode @ Faux123
GPU Overclocking up to 533MHz
Governors: Intellidemand , Conservative , Adaptive, wheatly , powersave , interactiveX , performance, Ondemand.
Schedulers: cfq , noop , bfq , deadline , vr , row , fiops , fifo , sio , zen.
OC Unlock / lock setting in Synapse = Default is set at 2.265GHz stock speed. = Replacement for maximum frequency lock (Based on angelom max_limit)
Extra driver support (Starting from Rev2.4)
USB_RTL8150
USB_HSO
USB_DUN_SUPPORT
FrontSwap and CleanCache (Starting from Rev2.4)
Compiled in release mode = stripped of all debugging (Starting from Rev2.4)
NTFS R/W support with the use of Paragon (see playstore)
ExFat
XZ compressed
Build in init.d support
DynamicFsync
insecure & adb insecure
Power suspend driver_1.2 @ Faux123
Synapse control added with various options: CPU control; Kernel controls...
Led control_1.1 @ Yank555.lu (Not on the 900T version)
mdnie control_1.3 and synapse support @ Wootever
Faux Sound_3.2 @ Faux123 & Wootever
2.88GHz Maximum overclock (unlock with Synapse app)
TouchBoostdriver Min frequency locked = no more jumping to 1.1GHz as minimum frequency
Voltage control thanks to myfluxi & synapse voltage control thanks to wootever. (Not on the 900T version)
Intelli HotPlug_2.0 & ECO Mode @ Faux123
GPU Overclocking up to 533MHz
Governors: Intellidemand , Conservative , Adaptive, wheatly , powersave , interactiveX , performance, Ondemand.
Schedulers: cfq , noop , bfq , deadline , vr , row , fiops , fifo , sio , zen.
OC Unlock / lock setting in Synapse = Default is set at 2.265GHz stock speed. = Replacement for maximum frequency lock (Based on angelom max_limit)
Extra driver support (Starting from Rev2.4)
USB_RTL8150
USB_HSO
USB_DUN_SUPPORT
FrontSwap and CleanCache (Starting from Rev2.4)
Compiled in release mode = stripped of all debugging (Starting from Rev2.4)
Pré-Requis :
PS : Avant d'installer ce KERNEL vous devez flasher et donc vous mettre à jour sur le nouveau firmware Kitkat tuto
ICI
1/Etre ROOT Rooter votre galaxy note 3
2/Avoir installé les drivers USB ICI
3/Avoir installé le cwm recovery n9005-cwm-recovery-6.0.4.7-kitkat
1) Faîtes un NANDROID Backup via le Recovery en allant dans "Backup et Restore/Backup" ou "Backup et Restore/Backup to External SD".
2) Faites un "Wipe Cache Partition" et dans "Advanced" "Wipe Dalvik Cache".
3) Flashez le Kernel.
4) Redémarrez et amusez-vous
Android 4.4.2 :
CivZ-SnapKat-Rev2.7-sm_n9005-4.4.2
CivZ-SnapKat-Rev2.7-sm_n9005-4.4.2
Stock :
Kernel Stock 4.4.2 [XXUENB3]
Kernel Stock 4.4.2 [XXUENB3]
Stock :
Kernel Stock 4.4.2 [XXUENA6]
Kernel Stock 4.4.2 [XXUENA6]
J'attend vos retours
Dernière édition par maya44 le Dim 6 Avr - 15:51, édité 4 fois
Invité- Invité
Re: [KERNEL] [N9005] [4.4.2] CivZ SnapKat_Rev2.7 [02.04.2014]
Encore !!!!!
Mais il est partout lui.....
Merci beaucoup maya44 pour ce superbe topic....
Nb : News Bannières a disposition ici si tu veux....
Mais il est partout lui.....
Merci beaucoup maya44 pour ce superbe topic....
Nb : News Bannières a disposition ici si tu veux....
Post-it- Confirmé
- Age : 51
Date d'inscription : 23/09/2013
Messages : 7320
Re: [KERNEL] [N9005] [4.4.2] CivZ SnapKat_Rev2.7 [02.04.2014]
Ben oui je fait une entrée en fanfarre
Et merci pour les bannieres
MISE A JOUR DU KERNEL EN 2.7
Et merci pour les bannieres
MISE A JOUR DU KERNEL EN 2.7
Invité- Invité
Sujets similaires
» [KERNEL] [N9005] [4.4.2] Sapec Kernel v1.7 [06.04.2014]
» [KERNEL] [GPL][3.4.91+][N9005][SM4.10]Blaze™ Kernel -4
» [ROM] [Kernel][N9005XXUGNI4] Echoe Rom v.19[UPDATE 25 October 2014]
» [ROM+KERNEL][4.4.2-9005XXUGNI4]FlexKat_Rev7.0 + KK_Xplorer_Rev1.9 -Aroma[26/10/2014]
» [N9005][4.4.4][hlte][AOSP] C-Rom v7.1 du 22/06/2014
» [KERNEL] [GPL][3.4.91+][N9005][SM4.10]Blaze™ Kernel -4
» [ROM] [Kernel][N9005XXUGNI4] Echoe Rom v.19[UPDATE 25 October 2014]
» [ROM+KERNEL][4.4.2-9005XXUGNI4]FlexKat_Rev7.0 + KK_Xplorer_Rev1.9 -Aroma[26/10/2014]
» [N9005][4.4.4][hlte][AOSP] C-Rom v7.1 du 22/06/2014
Page 1 sur 1
Permission de ce forum:
Vous ne pouvez pas répondre aux sujets dans ce forum