[ROM] Archive[i9300] [4.4.2] [KK] Temasek's UNOFFICIAL CM11 BUILD -V131 - 01/09/2014
Page 1 sur 4 • Partagez
Page 1 sur 4 • 1, 2, 3, 4
[ROM] Archive[i9300] [4.4.2] [KK] Temasek's UNOFFICIAL CM11 BUILD -V131 - 01/09/2014
[i9300] [4.4.2] [KK] Temasek's UNOFFICIAL CM11 BUILD -V131
Avertissement : Vous êtes seul responsable des installations et manipulations que vous effectuez sur votre appareil, ni moi, ni aucun membre du forum AndroidAddict ne pourra être tenu responsable d’éventuel dommage
"This is an UNOFFICIAL build of CM11 ( CyanogenMod 11 ) for i9300 and by NO means this is my ROM. I am just compiling from CM Source and 100% credits goes to TeamDouche, the device maintainers of i9300 Codeworkx/XpLoDWilD and all other coders who contributed to CyanogenMod.
This is similar to a nightly from CM but has some extra goodies baked in. If you can't handle some things possible being broken, please don't use this and then complain to me for building it."
- Build V129 idem 128.1:
Build V128.1
Changelog since V128
system/core: healthd: Disable the RTC wakeup timer
The timer is used here to avoid battery drained to zero. But the periodic
wakeup during suspend should not be needed as MSM PMIC already support
that by trigger interrupt to avoid the critical low battery situation.
This will save more power. And if the design is not support HW interrupt
of low battery, need to enable the timer to periodic check.
system/core: healthd: increase healthd fast timer to 10mins instead of 1min
healthd 1 min wakeups are causing significant power impact
during static display use case. so increasing the timer to 10min.
system/vold: Fix Vold to properly handle full-disk file systems (full-disk: no partitions)
- In Android, Vold recognizes a USB drive having a full-disk file system
and mounts it properly, but when the drive is removed from system Vold
won't unmount the device. This is because Vold only unmounts partitions.
For a FAT32 USB drive (with partitions), kernel will create two devices:
sda (disk device) and sda1 (partition device). When the drive is removed,
Vold will receive two netlink events: one for partition remove (sda1)
and one for disk remove (sda). The unmount occurs only when partition
remove event is received.
- For a full-disk FS USB drive, kernel will only create one device: sda
(disk device). When the drive is removed, Vold will only receive one
netlink event for disk remove (sda) and it won't unmount the device.
- This patch will verify if there is a currently mounted device when disk
remove event is received and will perform unmount, to properly unmount
the device.
system/vold: Add more headroom for ext4 app package containers.
- Code in the volume daemon that creates the filesystem image to contain
an installed application package currently adds about 1.6% to the
size estimate that is passed down to it to account for filesystem
overhead. That figure is based upon an assumption that the filesystem
is of type FAT, but is insufficient for some big application packages
when the filesystem is of type ext4.
- This change checks the filesystem type, and in the case where it's
ext4, adds about 6% to the input estimate to account for journaling,
etc.
MediaProvider: Avoid issue of android.process.media stop
- "OK" and "Cancel" button's click event response at the same time
lead to FATAL EXCEPTION. Make the click events do not happen at
the same time.
MediaProvider: Add feature to support group music by folder path
- There is no support to group music by folder path.
- Add extra query sql statement for supporting group music
by folder path.
MediaProvider: support streaming bookmark
- Add bookmarks table and bookmark URI.
MediaProvider: Make folder music change when delete music
- Lack the register for folder music uri,which cause the data
not change we obtain the change from uri.
- Register uri for folder music to make correspoing cursor
change when data change.
MediaProvider: Structure and sanitize input in AUDIO_FOLDER logic from CAF.
mms: Fix NPE when attaching slides
frameworks/base: Revert "Use actual storage type of sdcard/usb"
frameworks/base: add persistent notification when USB OTG is connected
- Tapping the notification will take the user into Storage settings, and
highlight the 'Unmount' option.
frameworks/base: QuickSettings: Use a Bug Report tile icon of proper size
Reuse of the ADB drawables causes alignment issues here.
Camera: Fix menu button margins.
- Make sure the button is center aligned to the shutter and mode switcher
buttons.
Updated cm sources
Let me know how's your idle & screen on time improvements.
- Kernel:
- Comes with Temasek Kernel v3.93
Changelog Since v3.92
- GPU OC to 578MHz
- Modified intelliactive by arter97
- Removal of unstable governors
- Revert "arm: arch_timer: set memory mapped timer interrupt as IRQF_TIMER"
This is one of the potential cause of random reboots & SOD.
- Updated FauxSound from v3.2 to v3.5
- Tone down debugging
- mmc: core: Optimize entering HS400 mode
- msm: ocmem: Check for NULL pointer from get_zone
- msm: ocmem: Add NULL pointer check for req structure
- Fix all leaks & warnings
device/hlte: hlte: Enable call recording for uplink and downlink
frameworks/base: SystemUI: Update user name timely when delete the user contact
- The user name isn't updated timely when delete the user contact in contacts.
- Update the user name timely when receive the user info changed event.
- CRs-Fixed: 673195
frameworks/base: lowmemorykiller: Overwrite LMK parameters for low-tier devices
- LMK parameters calculated by default algorithm were not optimal for low-tier devices.
Values mentioned here were well tested and evaluated w.r.t memory and performance
for such setups. (more suitable for i9300)
frameworks/base: ActivityManagerService: Penalise large apps going to background
- Large applications (PSS more than a given threshold) when closed are
penalised with higher ADJ. Now, they will be more prone to be killed by
lowmemorykiller during memory pressure levels. This ensures better app
concurrency and improved subsequent latencies as it leaves some more room
for other smaller bg apps to be alive
frameworks/base: [ActivityManager] Finish the failed-to-pause activity
Symptom:
In some scenario, the mPausingActivity may be replaced by other activity.
When previous activity paused, the completePausedLocked() won't be invoked
because it is no longer the mPausingActivity. If the activity is also
pending to finish, it would never be done because the activity kept in
PAUSING state. Since the activity's window also remain visible and is
above on Wallpaper, user would see it when back to home.
Solution:
Finish the failed-to-pause activity if the activity is pending to finish
A Real Case:
(1) Screen turn off
(2) The top activity T1 crashed
(3) When finish activity T1, the next top activity T2 will be scheduled
to resume and pause (due to screen off).
(4) The activity T2 is also set to finishing due to T1 crashed.
(5) Before T2 paused and before paused timeout occurs, there has a new
process started which brings up the next top activity T3 to resume
and pause. So the pausing activity is now replaced.
(6) When activity T2 paused, it cannot completed the pause operation.
T2 will remain in PAUSING and finishing state with its window visible.
The process won't be killed because the oomadj stays at 1 (Visible).
frameworks/base: Network: Check parameter for NULL in isMmsRequest method
- It's the NullPointerException which causes the third part
application can't work normally. It happens when the third
part application calls execute in AndroidHttpClient.java.
The parameter may null when calling checkMmsSendPermission.
- Add extra judgement to avoid NullPointerException for fixing
this issue.
- CRs-Fixed: 584775
libcore: Update our MIME type map.
- Bug: https://code.google.com/p/android/is...etail?id=61996
libcore: Fix MimeUtils to treat ".flac" as "audio/flac".
libcore: Switch Random to use AtomicLong
This removes the synchronization from next() and replaces the seed with
an AtomicLong.
libcore: Improve URI.equals performance.
The main improvement is that we're vastly reducing
the amount of garbage this method creates.
Also, get rid of some incorrect checks and add a new
benchmark test case.
Before vs. After:
URI Equals 1540.1 =
URI EqualsWithHeavilyEscapedComponent 11921397.1 ==============================
URI Equals 1337.2 =
URI EqualsWithHeavilyEscapedComponent 588934.3 ==============================
libcore: Allow multiple gzip members in gzip streams.
- We look for the gzip magic bytes at the end of every
member and try to decompress the remainder of the
stream if we find it.
- Note that this changes the behaviour of this class wrt.
the underlying stream: It is no longer self limiting. It
will attempt to read past the gzip trailer to look for
more data to decompress. Before this change, it would've
been possible to (hackily) consume the rest of the compressed
stream directly by inspecting the value of
InflaterInputStream.inf.getRemainingBytes(). It's no longer
possible to sensibly support that.
- bug: https://code.google.com/p/android/is...etail?id=63873
libcore: GZIPInputStream: avoid leaks in init.
If we throw inside the ctor, it is impossible for clients
to pass the CloseGuard test for the associated Inflater.
frameworks/av: stagefright: Fix 24-bit WAV
- When 24-bit output is enabled, we need to ensure that padding
to 32 bits is done correctly.
- Create new output buffers which conform to the correct format.
telephony: Phone: Fix forced closure when change language during adding SIP account
telephony: Phone: PIN2 shouldn't be seen when make passwords invisible
telephony: Phone: It should stay at Sip account details interface after unlock phone
telephony: Phone: Prompt port number invalid when the port number length too long
telephony: Phone: Add one dialog to prompt the SIM is turned off
telephony: Phone: Disbale the network item and update the titile
telephony: Settings: DUT can register on a forbidden network operator
telephony: Phone: Removing the unreachable call forward option
telephony: Phone: The option should be clickable after pressing OK
telephony: TeleService: Prompt user the fixed dialing number can’t be empty
Updated cm sources
Enjoy
Pour faire apparaître les liens, un p'tit merci en répondant au topic
ATTENTION, Faire une sauvegarde Nandroid (backup & restore > backup) avant toutes modifications de votre ROM actuelle !
1°)-Téléchargez la rom et les Gapps et collez-les sur votre carte SD Externe
2°)-Installer la dernièere version KK CWM (ClockWorkMod Recovery)
3°)-Redémarrer en mode recovery (Technique des trois bouttons : Power+Home+volume haut)
4°)-Wipe data/factory reset
5°)-Wipe cache partition
6°)-Advanced > Wipe dalvik cache
7°)-install zip from external sd-card > rom.zip
8°)-install zip from external sd-card > install Gapps 4.4.zip
9°)-Redémarrer !!
Si vous êtes déjà sur cm10.2 ou cm10.1 officielle ou une rom basée sur celles-ci alors vous avez juste à flasher la rom et les gapps sans wipes.
Merci @temasek
Dernière édition par Bishop le Jeu 2 Jan - 13:11, édité 1 fois
Bishop- Déterminé
- Date d'inscription : 12/09/2013
Localisation : Grenoble (38)
Humeur : :-)
Messages : 274
Re: [ROM] Archive[i9300] [4.4.2] [KK] Temasek's UNOFFICIAL CM11 BUILD -V131 - 01/09/2014
:-Superbe Topic merci pour le partage Bishop
Re: [ROM] Archive[i9300] [4.4.2] [KK] Temasek's UNOFFICIAL CM11 BUILD -V131 - 01/09/2014
super B merci pour le partage !!!!
Invité- Invité
Re: [ROM] Archive[i9300] [4.4.2] [KK] Temasek's UNOFFICIAL CM11 BUILD -V131 - 01/09/2014
:-Superbe Topic Bishop
Post-it- Confirmé
- Age : 51
Date d'inscription : 23/09/2013
Messages : 7320
Post-it- Confirmé
- Age : 51
Date d'inscription : 23/09/2013
Messages : 7320
jul390- Addict d'honneur
- Age : 40
Date d'inscription : 12/09/2013
Localisation : vittel
Humeur : toujours la forme
Messages : 2868
Post-it- Confirmé
- Age : 51
Date d'inscription : 23/09/2013
Messages : 7320
Re: [ROM] Archive[i9300] [4.4.2] [KK] Temasek's UNOFFICIAL CM11 BUILD -V131 - 01/09/2014
Build V28
i9300 - md5sum: c664ef802dbfcfc80821837c3b5d66f8
tilapia - md5sum: TBA
grouper - md5sum: TBA
hltexx - md5sum: f2cc7414e213a6dd6dd08056798d251e
CHANGELOG SINCE V27
SystemUI/Settings: Add LongClick SwitchButton
hlte-kernel: h: fixup config files.
- we don't have dvfs interfaces with cm.
- disable tima .
Settings: Use solid actionbar
When the action bar is visible, use the solid holo dark theme used
by the rest of the Settings app
hlte-common: H: fix tap to pay
hlte-common: Tweak Speaker DRV values
hltee-common: Cleanup board config
hlte-common: audio: ADC# Volume is 0-19 range not 0-124
Add "Sleep Screen" temasek shortcut
frameworks/base: Check for homeAsUp status when collapse actionbar widget
- mHomeLayout should be visible if one of DISPLAY_SHOW_HOME or DISPLAY_HOME_AS_UP are set.
collapseItemActionView only checks for DISPLAY_SHOW_HOME, so applications that only uses DISPLAY_HOME_AS_UP and uses an expandable/collapsible widget (like SearchView) doesn't properly restore the home layout.
- One sample of this behaviour is the DeskClock app. The CitiesActivity doesn't show the homeasup
indicator after collapse the searchview.
frameworks/base: fix reconstruct statusbar illegal argument exception
Finally I got a logcat what is happening in rare cases. If the reconstruct
happens during a notification ticker was send it returns a negative
width value for the static layout and systemUI crashes.
E/AndroidRuntime( 970): java.lang.IllegalArgumentException: Layout: -23 < 0
E/AndroidRuntime( 970): at android.text.Layout.(Layout.java:138)
E/AndroidRuntime( 970): at android.text.StaticLayout.(StaticLayout.java :104)
E/AndroidRuntime( 970): at android.text.StaticLayout.(StaticLayout.java :90)
E/AndroidRuntime( 970): at android.text.StaticLayout.(StaticLayout.java :68)
E/AndroidRuntime( 970): at android.text.StaticLayout.(StaticLayout.java :48)
E/AndroidRuntime( 970): at com.android.systemui.statusbar.phone.Ticker$Segmen t.getLayout(Ticker.java:72)
E/AndroidRuntime( 970): at com.android.systemui.statusbar.phone.Ticker$Segmen t.getText(Ticker.java:91)
E/AndroidRuntime( 970): at com.android.systemui.statusbar.phone.Ticker.addEnt ry(Ticker.java:226)
E/AndroidRuntime( 970): at com.android.systemui.statusbar.phone.PhoneStatusBa r.tick(PhoneStatusBar.java:2862)
E/AndroidRuntime( 970): at com.android.systemui.statusbar.phone.PhoneStatusBa r.addNotification(PhoneStatusBar.java:1432)
E/AndroidRuntime( 970): at com.android.systemui.statusbar.CommandQueue$H.hand leMessage(CommandQueue.java:322)
to avoid this check before a new StaticLayout is constructed if the width is < 0 and if this
is the case abort the operation. This is in this case a legit way due that the notification
gets reconstructed during this process later so or so
frameworks/base: privacyguard: Share privacy package name between activity stacks
- AOSP 4.4 now has a stack supervisor with differents activity stacks for home and focus activities. Every ActivityStack instance has a ref to this supervisor. Just share the privacy guard package name throught the supervisor.
frameworks/base: WifiState: Don't aquire transitionwakelock in airplane mode
- NetworkTransitionWakelock is for transition from Wifi to mobile. It will cause device no sleep for 60s. There is no need to acquire it in airplane mode.
frameworks/base: NetworkPolicy: Validate policy templates before updating
- Ensure all the policies to be added are validated, otherwise this service will throw IllegalArgumentException and cause system crash when updating network template after receiving ACTION_NETWORK_STATS_UPDATED.
frameworks/base: Use highp precision for scaled coordination
- If scaled coordination is closer to zero than what the medium precision can store, distance becomes zero and it causes divided by zero.
frameworks/base: Revert "Fix for Concurrency issue reported in 525529"
hlte-common: Add HDR Video in CM Camera
hal: Allow enablment of COMPRESS_VOIP without multisession voice
FIXED - Backup account in "Backup & reset" settings
Add QS Custom Tile[/COLOR][/B] - SlimROM
- Now you can add any custom tile to your Quick Settings
- Available in temasek spare parts
Disable back key on non-intrusive InCallUI
Fixed stylus eraser being rejected by palm rejection
- The stylus eraser appeared not to work, i.e. Android did not respond to input from the eraser. It turned out that all input except stylus input is rejected when palm rejection is activated. The problem was that the eraser itself activates palm rejection when it hovers. The solution is to allow the eraser during palm rejection. This solution makes sense because the eraser input works in the exact same way as normal stylus input.
Settings: Remove ZRAM settings
- Android has proper ZRAM support builtin now, and this code doesn't even work. Remove it.
Updated cm source. - Lots of it.
B
i9300 - md5sum: c664ef802dbfcfc80821837c3b5d66f8
tilapia - md5sum: TBA
grouper - md5sum: TBA
hltexx - md5sum: f2cc7414e213a6dd6dd08056798d251e
CHANGELOG SINCE V27
SystemUI/Settings: Add LongClick SwitchButton
hlte-kernel: h: fixup config files.
- we don't have dvfs interfaces with cm.
- disable tima .
Settings: Use solid actionbar
When the action bar is visible, use the solid holo dark theme used
by the rest of the Settings app
hlte-common: H: fix tap to pay
hlte-common: Tweak Speaker DRV values
hltee-common: Cleanup board config
hlte-common: audio: ADC# Volume is 0-19 range not 0-124
Add "Sleep Screen" temasek shortcut
frameworks/base: Check for homeAsUp status when collapse actionbar widget
- mHomeLayout should be visible if one of DISPLAY_SHOW_HOME or DISPLAY_HOME_AS_UP are set.
collapseItemActionView only checks for DISPLAY_SHOW_HOME, so applications that only uses DISPLAY_HOME_AS_UP and uses an expandable/collapsible widget (like SearchView) doesn't properly restore the home layout.
- One sample of this behaviour is the DeskClock app. The CitiesActivity doesn't show the homeasup
indicator after collapse the searchview.
frameworks/base: fix reconstruct statusbar illegal argument exception
Finally I got a logcat what is happening in rare cases. If the reconstruct
happens during a notification ticker was send it returns a negative
width value for the static layout and systemUI crashes.
E/AndroidRuntime( 970): java.lang.IllegalArgumentException: Layout: -23 < 0
E/AndroidRuntime( 970): at android.text.Layout.
E/AndroidRuntime( 970): at android.text.StaticLayout.
E/AndroidRuntime( 970): at android.text.StaticLayout.
E/AndroidRuntime( 970): at android.text.StaticLayout.
E/AndroidRuntime( 970): at android.text.StaticLayout.
E/AndroidRuntime( 970): at com.android.systemui.statusbar.phone.Ticker$Segmen t.getLayout(Ticker.java:72)
E/AndroidRuntime( 970): at com.android.systemui.statusbar.phone.Ticker$Segmen t.getText(Ticker.java:91)
E/AndroidRuntime( 970): at com.android.systemui.statusbar.phone.Ticker.addEnt ry(Ticker.java:226)
E/AndroidRuntime( 970): at com.android.systemui.statusbar.phone.PhoneStatusBa r.tick(PhoneStatusBar.java:2862)
E/AndroidRuntime( 970): at com.android.systemui.statusbar.phone.PhoneStatusBa r.addNotification(PhoneStatusBar.java:1432)
E/AndroidRuntime( 970): at com.android.systemui.statusbar.CommandQueue$H.hand leMessage(CommandQueue.java:322)
to avoid this check before a new StaticLayout is constructed if the width is < 0 and if this
is the case abort the operation. This is in this case a legit way due that the notification
gets reconstructed during this process later so or so
frameworks/base: privacyguard: Share privacy package name between activity stacks
- AOSP 4.4 now has a stack supervisor with differents activity stacks for home and focus activities. Every ActivityStack instance has a ref to this supervisor. Just share the privacy guard package name throught the supervisor.
frameworks/base: WifiState: Don't aquire transitionwakelock in airplane mode
- NetworkTransitionWakelock is for transition from Wifi to mobile. It will cause device no sleep for 60s. There is no need to acquire it in airplane mode.
frameworks/base: NetworkPolicy: Validate policy templates before updating
- Ensure all the policies to be added are validated, otherwise this service will throw IllegalArgumentException and cause system crash when updating network template after receiving ACTION_NETWORK_STATS_UPDATED.
frameworks/base: Use highp precision for scaled coordination
- If scaled coordination is closer to zero than what the medium precision can store, distance becomes zero and it causes divided by zero.
frameworks/base: Revert "Fix for Concurrency issue reported in 525529"
hlte-common: Add HDR Video in CM Camera
hal: Allow enablment of COMPRESS_VOIP without multisession voice
FIXED - Backup account in "Backup & reset" settings
Add QS Custom Tile[/COLOR][/B] - SlimROM
- Now you can add any custom tile to your Quick Settings
- Available in temasek spare parts
Disable back key on non-intrusive InCallUI
Fixed stylus eraser being rejected by palm rejection
- The stylus eraser appeared not to work, i.e. Android did not respond to input from the eraser. It turned out that all input except stylus input is rejected when palm rejection is activated. The problem was that the eraser itself activates palm rejection when it hovers. The solution is to allow the eraser during palm rejection. This solution makes sense because the eraser input works in the exact same way as normal stylus input.
Settings: Remove ZRAM settings
- Android has proper ZRAM support builtin now, and this code doesn't even work. Remove it.
Updated cm source. - Lots of it.
B
Bishop- Déterminé
- Date d'inscription : 12/09/2013
Localisation : Grenoble (38)
Humeur : :-)
Messages : 274
Post-it- Confirmé
- Age : 51
Date d'inscription : 23/09/2013
Messages : 7320
Re: [ROM] Archive[i9300] [4.4.2] [KK] Temasek's UNOFFICIAL CM11 BUILD -V131 - 01/09/2014
Merci svp d'arreter de dire "Merci" lol
Il ya plus de place pour des retours d'utilisateurs ...mdr !!!
B
Il ya plus de place pour des retours d'utilisateurs ...mdr !!!
B
Bishop- Déterminé
- Date d'inscription : 12/09/2013
Localisation : Grenoble (38)
Humeur : :-)
Messages : 274
Re: [ROM] Archive[i9300] [4.4.2] [KK] Temasek's UNOFFICIAL CM11 BUILD -V131 - 01/09/2014
V29 dispo
http://temasek.hopto.org/?dir=Samsung%20Galaxy%20S3%20-%20i9300/CM11.0
CHANGELOG SINCE V28
hlte-common: use nagivation pointer for epen
hlte-common: add CM performance profile definitions
hlte-common: gps: Add loc_eng_set_privacy function to enable/disable GPS privacy lock.
- Privacy lock is enabled on loc_eng_init, disabled on loc_eng_cleanup, mimicking the behavior of TW. Requires system property ro.gps.set_privacy=1 to enable/disable privacy lock.
- The privacy lock state is non-volatile, and control of the lock is needed to ensure that the GPS works and is responsive to requests. Otherwise the GPS may silently cease to work depending on its last state in TW.
hlte-common: bringup gps hal
frameworks/av: Call Record with Alsa
Dialer - Add Russian T9 (dimfishr)
Dialer - Dialpad Russian buttons (dimfishr)
Dialer - Support Russian Country Code (dimfishr)
InCallUI - Russian dialer buttons (dimfishr)
InCallUI - InCall full screen photo (dimfishr)
InCallUI - Disable Touch by Proximity Sensor
cLock - Lots of changes
Updated cm source
B :langue2:
http://temasek.hopto.org/?dir=Samsung%20Galaxy%20S3%20-%20i9300/CM11.0
CHANGELOG SINCE V28
hlte-common: use nagivation pointer for epen
hlte-common: add CM performance profile definitions
hlte-common: gps: Add loc_eng_set_privacy function to enable/disable GPS privacy lock.
- Privacy lock is enabled on loc_eng_init, disabled on loc_eng_cleanup, mimicking the behavior of TW. Requires system property ro.gps.set_privacy=1 to enable/disable privacy lock.
- The privacy lock state is non-volatile, and control of the lock is needed to ensure that the GPS works and is responsive to requests. Otherwise the GPS may silently cease to work depending on its last state in TW.
hlte-common: bringup gps hal
frameworks/av: Call Record with Alsa
Dialer - Add Russian T9 (dimfishr)
Dialer - Dialpad Russian buttons (dimfishr)
Dialer - Support Russian Country Code (dimfishr)
InCallUI - Russian dialer buttons (dimfishr)
InCallUI - InCall full screen photo (dimfishr)
InCallUI - Disable Touch by Proximity Sensor
cLock - Lots of changes
Updated cm source
B :langue2:
Bishop- Déterminé
- Date d'inscription : 12/09/2013
Localisation : Grenoble (38)
Humeur : :-)
Messages : 274
Re: [ROM] Archive[i9300] [4.4.2] [KK] Temasek's UNOFFICIAL CM11 BUILD -V131 - 01/09/2014
Build V30
i9300 - md5sum: b673f4a14f10cedd34c75932bc89f180
hltexx - md5sum: 9ed61ea7ea66333ece2726db131aa991
tilapia - md5sum: fb0e7b9f31b869c5a1e04450bf3e1c78
grouper - md5sum: 7c3f2f2dd26a915a547fce255df466a4
Quote:
I am supposed to be off for the weekend but I squeezed out 1-2 hrs to do this. Hope u enjoy. I quite like the QS Contact Tile by SlimROM. Thank you SlimROM.
CHANGELOG SINCE V29
hlte-kernel - power enhancement for wacom hardware.
- always disable digitizer when the pen is inserted
hlte-common - Limit boot speed up to 2.27ghz
- upcoming temasek kernel will be able to OC up to 2.5ghz.
- But boot up set the limit max speed to 2.27ghz
frameworks/Settings - QS Add Favorite Contact Tile
frameworks/base - NPE in SearchManager.triggerSearch
- mAssociatedPackage field is never initialized and cause NPE.
frameworks/base - Prevent nullPointerException by updateBondedBluetoothDevices
- In some very rare cases difficult to identify, it seems that the IBluetooth.getBondedDevices() returns a Set with a null element.
- This patch will prevent calling getBondState() if the device is null to avoid a nullPointerException.
frameworks/base - Fix appwidgets not updating
- Previously there was a bug where if an appwidget's update caused a TransactionTooLargeException then the AppWidgetServiceImpl.Host's callbacks were completely disabled, for all widgets.
- The fix still allows a DeadObjectException or other RemoteException to disable the host callbacks, as that would be caused by a bad host.
- Fixes issue 28216 on the public tracker https://code.google.com/p/android/is...etail?id=28216
frameworks/base - XmlUtils#readThisMapXml should handle null keys.
- Both readThisValueXml & writeThisValueXml have been implemented to handle values with "null" names.
- Change readThisMapXml to allow such names as well, and map them to the null key in the resulting HashMap. readThisListXml and readThisSetXml already support null names.
frameworks/base - p2p: Display P2P peer MAC address if device name is empty.
- Display MAC address of a P2P peer in an invitation prompt message on receiving invitation request from the P2P peer with empty device name.
vendor/cm - Removed "CellBroadcastReceiver" from building in source
- hltexx & grouper not affected
- i9300 & tilapia, due to I did not do a clobber build, the CellBroadcastReceiver.apk is till in my out folder and thus copied over to the final build. You may manually delete the apk and do a reboot.
vendor/cm - Remove proxy and port on APN 3 Indonesia
i9300: Update build fingerprint to 4.3 JSS15J I9300XXUGMJ9
system/core - adb: do not chown/chmod files pushed to sdcard
- Commit "adb: configure /system file permission with fs_config" can cause 'Operation not permitted' errors when pushing files to sdcard because chown and chmod are not allowed. Omit chown and chmod operations if the destination directory has sdcard in the group name.
Revert "Dialer - Add Russian T9 (dimfishr)""
Revert "Dialer - Dialpad Russian buttons (dimfishr)"
Revert "Dialer - Support Russian Country Code (dimfishr)"
Revert "InCallUI - Russian dialer buttons (dimfishr)"
Updated cm source
B ;-)
i9300 - md5sum: b673f4a14f10cedd34c75932bc89f180
hltexx - md5sum: 9ed61ea7ea66333ece2726db131aa991
tilapia - md5sum: fb0e7b9f31b869c5a1e04450bf3e1c78
grouper - md5sum: 7c3f2f2dd26a915a547fce255df466a4
Quote:
I am supposed to be off for the weekend but I squeezed out 1-2 hrs to do this. Hope u enjoy. I quite like the QS Contact Tile by SlimROM. Thank you SlimROM.
CHANGELOG SINCE V29
hlte-kernel - power enhancement for wacom hardware.
- always disable digitizer when the pen is inserted
hlte-common - Limit boot speed up to 2.27ghz
- upcoming temasek kernel will be able to OC up to 2.5ghz.
- But boot up set the limit max speed to 2.27ghz
frameworks/Settings - QS Add Favorite Contact Tile
frameworks/base - NPE in SearchManager.triggerSearch
- mAssociatedPackage field is never initialized and cause NPE.
frameworks/base - Prevent nullPointerException by updateBondedBluetoothDevices
- In some very rare cases difficult to identify, it seems that the IBluetooth.getBondedDevices() returns a Set with a null element.
- This patch will prevent calling getBondState() if the device is null to avoid a nullPointerException.
frameworks/base - Fix appwidgets not updating
- Previously there was a bug where if an appwidget's update caused a TransactionTooLargeException then the AppWidgetServiceImpl.Host's callbacks were completely disabled, for all widgets.
- The fix still allows a DeadObjectException or other RemoteException to disable the host callbacks, as that would be caused by a bad host.
- Fixes issue 28216 on the public tracker https://code.google.com/p/android/is...etail?id=28216
frameworks/base - XmlUtils#readThisMapXml should handle null keys.
- Both readThisValueXml & writeThisValueXml have been implemented to handle values with "null" names.
- Change readThisMapXml to allow such names as well, and map them to the null key in the resulting HashMap. readThisListXml and readThisSetXml already support null names.
frameworks/base - p2p: Display P2P peer MAC address if device name is empty.
- Display MAC address of a P2P peer in an invitation prompt message on receiving invitation request from the P2P peer with empty device name.
vendor/cm - Removed "CellBroadcastReceiver" from building in source
- hltexx & grouper not affected
- i9300 & tilapia, due to I did not do a clobber build, the CellBroadcastReceiver.apk is till in my out folder and thus copied over to the final build. You may manually delete the apk and do a reboot.
vendor/cm - Remove proxy and port on APN 3 Indonesia
i9300: Update build fingerprint to 4.3 JSS15J I9300XXUGMJ9
system/core - adb: do not chown/chmod files pushed to sdcard
- Commit "adb: configure /system file permission with fs_config" can cause 'Operation not permitted' errors when pushing files to sdcard because chown and chmod are not allowed. Omit chown and chmod operations if the destination directory has sdcard in the group name.
Revert "Dialer - Add Russian T9 (dimfishr)""
Revert "Dialer - Dialpad Russian buttons (dimfishr)"
Revert "Dialer - Support Russian Country Code (dimfishr)"
Revert "InCallUI - Russian dialer buttons (dimfishr)"
Updated cm source
B ;-)
Bishop- Déterminé
- Date d'inscription : 12/09/2013
Localisation : Grenoble (38)
Humeur : :-)
Messages : 274
Re: [ROM] Archive[i9300] [4.4.2] [KK] Temasek's UNOFFICIAL CM11 BUILD -V131 - 01/09/2014
:farao: New Gapps (Banks) available: [GApps][4.4.2][1-9-2014] (with new Google Play Services 4.1.31 - should be more battery friendly)
sources: http://goo.im/devs/BaNkS/GApps/4.4.2
http://forum.xda-developers.com/showthread.php?t=2012857
http://forum.xda-developers.com/showthread.php?t=1797109&page=5292
B ;-)
sources: http://goo.im/devs/BaNkS/GApps/4.4.2
http://forum.xda-developers.com/showthread.php?t=2012857
http://forum.xda-developers.com/showthread.php?t=1797109&page=5292
B ;-)
Bishop- Déterminé
- Date d'inscription : 12/09/2013
Localisation : Grenoble (38)
Humeur : :-)
Messages : 274
Re: [ROM] Archive[i9300] [4.4.2] [KK] Temasek's UNOFFICIAL CM11 BUILD -V131 - 01/09/2014
Build V31
i9300 - md5sum: e49cfc4901e346e6439ed384e3ab9824
CHANGELOG SINCE V30
hlte-kernel: shutdown capative key when fbblanks
hlte-common: kang gps configs from jf's gps-nomsb
hlte-common: adreno openvg and opencl support
hlte-common: Add libllvm-a3xx.so to be pulled from device.
frameworks/base: added national roaming for ONO in spain
- Users of ONO in Spain (MCC 214 MNC 18) will roam on Movistar (MNC 07)
frameworks/base: fix remaining blue dialog dividers
frameworks/base: Add Long-Click to Preference Tile
- This will open the add tile activity like it was before in JB
frameworks/base: fix multiuser bug in vibrator service
- This value can be used by a 3rd party application. This would result in a crash like it is now. Assign the correct userid category to resolve that
frameworks/base: Add explicit close of Scanner input
- The UsbDeviceManager is using a Scanner to identify the ALSA card/device numbers to use for USB Gadget audio, with a FileInputStream as its input.
- Since FileInputStream implements the Closeable interface it provides a close() method that should be explictly called in order to close the stream source and release any system resources that it might hold.
frameworks/base: Fix memory leak in PatchCache
- Patch object should be deleted when removing its corresponding cache entry from PatchCache.
frameworks/base: Don't rely on gcc extensions
- Variable-length arrays of non-POD data types are a gcc extension not currently supported by clang.
frameworks/base: UsbDebuggingManager: Fix multiple NPEs toggling USB debugging
frameworks/base: PhoneStatusBar: fix massive surface redraws due of animation race
- the wifi/carrier label is animated from AOSP via an alpha animation. Problem
is that we quiet often call this on other animations and this will end in a animation loop which forces massive surface redraws. Whatever to avoid this
do it like for notification shortcuts and set directly the alpha value which look so or so better in the whole animation.
- As well a small code cleanup
frameworks/base: Revert "SystemUI: update internal state right after hiding transient bars."
frameworks/base: Keyguard: smooth background change derp fixes
- no idea how this could happened. Cleanup, fixes and updates (thanks kyril)
Settings: Fix elapsed time formatting.
- We should extend DateUtils to provide this kind of elapsed time formatting via icu4c, but for now let's at least fix our arithmetic.
- Bug: https://code.google.com/p/android/is...etail?id=61479
smdk4412-common: Revert "camera: Fix loss of focus mode between shots"
- This reverts commit 40279ba. - @dhiru1602
- V4L2_CID_CAMERA_FOCUS_MODE has the side effect of resetting the sensor AF position. Hence, the focus is lost each time SetParameters is called and this happens during a snapshot resulting in out of focus pictures.
smdk4412-common: camera: implement CAMERA_MSG_FOCUS_MOVE to report CAF - @dhiru1602
- Since we are querying the status of CAF in real time, implement CAMERA_MSG_FOCUS_MOVE to report the CAF status.
- Also monitor the state of AutoFocus and report success or failure only when AutoFocus has started. This prevents reporting false AutoFocus status which relates to the previous AutoFocus result.
vendor/cm: Add b-mobile APN
- b-mobile is provider of telecommunications in japan.
Updated cm source
B
i9300 - md5sum: e49cfc4901e346e6439ed384e3ab9824
CHANGELOG SINCE V30
hlte-kernel: shutdown capative key when fbblanks
hlte-common: kang gps configs from jf's gps-nomsb
hlte-common: adreno openvg and opencl support
hlte-common: Add libllvm-a3xx.so to be pulled from device.
frameworks/base: added national roaming for ONO in spain
- Users of ONO in Spain (MCC 214 MNC 18) will roam on Movistar (MNC 07)
frameworks/base: fix remaining blue dialog dividers
frameworks/base: Add Long-Click to Preference Tile
- This will open the add tile activity like it was before in JB
frameworks/base: fix multiuser bug in vibrator service
- This value can be used by a 3rd party application. This would result in a crash like it is now. Assign the correct userid category to resolve that
frameworks/base: Add explicit close of Scanner input
- The UsbDeviceManager is using a Scanner to identify the ALSA card/device numbers to use for USB Gadget audio, with a FileInputStream as its input.
- Since FileInputStream implements the Closeable interface it provides a close() method that should be explictly called in order to close the stream source and release any system resources that it might hold.
frameworks/base: Fix memory leak in PatchCache
- Patch object should be deleted when removing its corresponding cache entry from PatchCache.
frameworks/base: Don't rely on gcc extensions
- Variable-length arrays of non-POD data types are a gcc extension not currently supported by clang.
frameworks/base: UsbDebuggingManager: Fix multiple NPEs toggling USB debugging
frameworks/base: PhoneStatusBar: fix massive surface redraws due of animation race
- the wifi/carrier label is animated from AOSP via an alpha animation. Problem
is that we quiet often call this on other animations and this will end in a animation loop which forces massive surface redraws. Whatever to avoid this
do it like for notification shortcuts and set directly the alpha value which look so or so better in the whole animation.
- As well a small code cleanup
frameworks/base: Revert "SystemUI: update internal state right after hiding transient bars."
frameworks/base: Keyguard: smooth background change derp fixes
- no idea how this could happened. Cleanup, fixes and updates (thanks kyril)
Settings: Fix elapsed time formatting.
- We should extend DateUtils to provide this kind of elapsed time formatting via icu4c, but for now let's at least fix our arithmetic.
- Bug: https://code.google.com/p/android/is...etail?id=61479
smdk4412-common: Revert "camera: Fix loss of focus mode between shots"
- This reverts commit 40279ba. - @dhiru1602
- V4L2_CID_CAMERA_FOCUS_MODE has the side effect of resetting the sensor AF position. Hence, the focus is lost each time SetParameters is called and this happens during a snapshot resulting in out of focus pictures.
smdk4412-common: camera: implement CAMERA_MSG_FOCUS_MOVE to report CAF - @dhiru1602
- Since we are querying the status of CAF in real time, implement CAMERA_MSG_FOCUS_MOVE to report the CAF status.
- Also monitor the state of AutoFocus and report success or failure only when AutoFocus has started. This prevents reporting false AutoFocus status which relates to the previous AutoFocus result.
vendor/cm: Add b-mobile APN
- b-mobile is provider of telecommunications in japan.
Updated cm source
B
Bishop- Déterminé
- Date d'inscription : 12/09/2013
Localisation : Grenoble (38)
Humeur : :-)
Messages : 274
Re: [ROM] Archive[i9300] [4.4.2] [KK] Temasek's UNOFFICIAL CM11 BUILD -V131 - 01/09/2014
Build V33
i9300 - md5sum: 71123fda7e0c07e70ff52e3e20decd7e
CHANGELOG SINCE V31 (i9300 missed V32 build)
This is a Clobbered build
Revert Omni feature "InCall: Add a non-intrusive dialog for incoming calls"
Added SlimROM feature "InCallUI: Incoming Call in Background"
- Patch ported from 4.2 which was done by our lovely HCP. A very popular one so we bring it back and adapt it to 4.4
- Allows user to set that Incoming Call UI will remain in background if screen is on. Instead, a notification is added to StatusBar, which can be used to bring up the Incoming Call UI. Ringtone and vibration still occur as per system settings.
- This has the same effect as apps marked as "immersive". It prevents the incoming call from backgrounding the current activity.
- Default is disabled
- To enable pls proceed to Dialer settings and enable it.
- Personally I find this very cool feature (temasek)
Added "Keep InCallUI in memory" - CM Feature (open commit)
- In lower end devices, startup of the InCallUI process can take up to 10 seconds when the device is busy, which prevents the user from taking the call. Keep the process in memory like previous versions where they are a part of Phone.apk.
- This converts InCallUI into a dummy apk with the persistent attribute set to true and allows the activity from Dialer.apk, which uses the com.android.incallui process to be loaded into the persistent process.
frameworks/base: Revert "Fix fatal exception due to missing looper for current thread."
hlte-common: lower the speaker-drv volume.
- fixes speaker crackling issue
hlte-kernel: fix double suspend/resume issue
frameworks/base: more fix Active Display - OmniROM
- fix http://jira.omnirom.org/browse/OMNI-352
- fix http://jira.omnirom.org/browse/OMNI-357
frameworks/base: The Netherlands national Roaming
:: 06-01-2014
- Added for networks
KPN
Hi
Telfort
Vodafone
:: 07-01-2014
- Changed the config.xml
Thanks to Andrew Dodd
- Added mcc204-mnc02.
Network Tele2
Thanks Silas Arentsen
:: 10-01-2014
- Added mcc204-mnc03, mcc204-mnc10, mcc204-mnc20
Networks Voiceworks (PrivateGSM), KPN (2?), T-Mobile
These networks have a GHM band others in this list don't..
(http://en.wikipedia.org/wiki/Mobile_country_code)
Thanks Max Weninger!
frameworks/base: added national roaming for Orange in Austria
- http://jira.omnirom.org/browse/OMNI-376
- Users of Orange in Autria (MCC 232 MNC 05) which is now a subcompany of 3AT can roam on 3AT (MNC10) and also on t-mobile (MNC03) for 2G
frameworks/base: Allow hiding notification icons - OmniROM
- When long pressing a notification, add another menu item which allows the user to hide the notification icon (but keep the actual notification in the dropdown).
- This is meant for applications which have services running in the statusbar which the user is aware of, so right now we hide the icon by the package.
frameworks/base: SystemUI: Always show translucent decor on recents panel
frameworks/base: Fix a JNI local reference leak in MediaDrm
- A reference leak was found in the subtitle usecase that also applies to android_media_MediaDrm.cpp (Code taken from the similar fix in android_media_MediaPlayer.cpp)
frameworks/base: Fix visibility of multiple non-fullscreen activities.
Issue detail:
- Assume X, Y are non-fullscreen activities.
a.Home starts an activity X in task A in application stack.
b.X starts an activity Y in or
c.Activity X will be invisible.
How to fix:
Because the function "isActivityOverHome" means an activity is able to see home.
- But there may have many non-fullscreen activities between the top non-fullscreen activity and home.
- If flag "behindFullscreen" is set, those middle activities will be invisible.
So it should only take care from who is adjacent to home. Then check two flags frontOfTask(task root) and mOnTopOfHome for constraining the condition.
frameworks/base: Cursor leakage due to cancellation signal
- If a query call was cancelled, the cursor adaptor might leak. The adaptor is now closed if any exception is thrown during query.
frameworks/base: QS: fix wrong measurement on 4 or 5 tiles per row on settingspanelview - SlimROM
- Issue was only visible on devices which have settingspanelview (tablets - not flippable) on boot up on landscape and had 4 or 5 tiles per row set. Problem is that due we have the same layout situation like in portrait on this devices that the layoutparameter height needs to be calculated in landscape as well.
- Solve it with forcing (on only settingspanelview devices) the calculation on landscape as well
frameworks/base: make QS again rtl aware
- we removed on first version the possibility to respect rtl add it back to be aware.
- As well remove the try to fix the tablet on first boot landscape problem
It actually did not fix the problem.
Settings: FIXED - Settings FC - Wrong fragment class
Settings: Fix null pointer exceptions in NetworkPolicyEditor
- This upload fixes a null pointer exception issue. After this fix the modified methods return their corresponding default values instead of null.
Settings: Bluetooth: Set alias name only through Rename option
- Set the alias name only when user is trying to change the name using the Rename option of paired device.
- CRs-Fixed: 539420
Settings: Bluetooth: Don't set a null alias before unpairing
- This causes the unpair action to throw a null pointer exception and bring down the Settings app. Don't do this.
smdk4412-common: Add back "smdk4412-common: camera: include support for face detection"
Updated cm source
dl: http://temasek.hopto.org/?dir=Samsung%20Galaxy%20S3%20-%20i9300/CM11.0
B
i9300 - md5sum: 71123fda7e0c07e70ff52e3e20decd7e
CHANGELOG SINCE V31 (i9300 missed V32 build)
This is a Clobbered build
Revert Omni feature "InCall: Add a non-intrusive dialog for incoming calls"
Added SlimROM feature "InCallUI: Incoming Call in Background"
- Patch ported from 4.2 which was done by our lovely HCP. A very popular one so we bring it back and adapt it to 4.4
- Allows user to set that Incoming Call UI will remain in background if screen is on. Instead, a notification is added to StatusBar, which can be used to bring up the Incoming Call UI. Ringtone and vibration still occur as per system settings.
- This has the same effect as apps marked as "immersive". It prevents the incoming call from backgrounding the current activity.
- Default is disabled
- To enable pls proceed to Dialer settings and enable it.
- Personally I find this very cool feature (temasek)
Added "Keep InCallUI in memory" - CM Feature (open commit)
- In lower end devices, startup of the InCallUI process can take up to 10 seconds when the device is busy, which prevents the user from taking the call. Keep the process in memory like previous versions where they are a part of Phone.apk.
- This converts InCallUI into a dummy apk with the persistent attribute set to true and allows the activity from Dialer.apk, which uses the com.android.incallui process to be loaded into the persistent process.
frameworks/base: Revert "Fix fatal exception due to missing looper for current thread."
hlte-common: lower the speaker-drv volume.
- fixes speaker crackling issue
hlte-kernel: fix double suspend/resume issue
frameworks/base: more fix Active Display - OmniROM
- fix http://jira.omnirom.org/browse/OMNI-352
- fix http://jira.omnirom.org/browse/OMNI-357
frameworks/base: The Netherlands national Roaming
:: 06-01-2014
- Added for networks
KPN
Hi
Telfort
Vodafone
:: 07-01-2014
- Changed the config.xml
Thanks to Andrew Dodd
- Added mcc204-mnc02.
Network Tele2
Thanks Silas Arentsen
:: 10-01-2014
- Added mcc204-mnc03, mcc204-mnc10, mcc204-mnc20
Networks Voiceworks (PrivateGSM), KPN (2?), T-Mobile
These networks have a GHM band others in this list don't..
(http://en.wikipedia.org/wiki/Mobile_country_code)
Thanks Max Weninger!
frameworks/base: added national roaming for Orange in Austria
- http://jira.omnirom.org/browse/OMNI-376
- Users of Orange in Autria (MCC 232 MNC 05) which is now a subcompany of 3AT can roam on 3AT (MNC10) and also on t-mobile (MNC03) for 2G
frameworks/base: Allow hiding notification icons - OmniROM
- When long pressing a notification, add another menu item which allows the user to hide the notification icon (but keep the actual notification in the dropdown).
- This is meant for applications which have services running in the statusbar which the user is aware of, so right now we hide the icon by the package.
frameworks/base: SystemUI: Always show translucent decor on recents panel
frameworks/base: Fix a JNI local reference leak in MediaDrm
- A reference leak was found in the subtitle usecase that also applies to android_media_MediaDrm.cpp (Code taken from the similar fix in android_media_MediaPlayer.cpp)
frameworks/base: Fix visibility of multiple non-fullscreen activities.
Issue detail:
- Assume X, Y are non-fullscreen activities.
a.Home starts an activity X in task A in application stack.
b.X starts an activity Y in
c.Activity X will be invisible.
How to fix:
Because the function "isActivityOverHome" means an activity is able to see home.
- But there may have many non-fullscreen activities between the top non-fullscreen activity and home.
- If flag "behindFullscreen" is set, those middle activities will be invisible.
So it should only take care from who is adjacent to home. Then check two flags frontOfTask(task root) and mOnTopOfHome for constraining the condition.
frameworks/base: Cursor leakage due to cancellation signal
- If a query call was cancelled, the cursor adaptor might leak. The adaptor is now closed if any exception is thrown during query.
frameworks/base: QS: fix wrong measurement on 4 or 5 tiles per row on settingspanelview - SlimROM
- Issue was only visible on devices which have settingspanelview (tablets - not flippable) on boot up on landscape and had 4 or 5 tiles per row set. Problem is that due we have the same layout situation like in portrait on this devices that the layoutparameter height needs to be calculated in landscape as well.
- Solve it with forcing (on only settingspanelview devices) the calculation on landscape as well
frameworks/base: make QS again rtl aware
- we removed on first version the possibility to respect rtl add it back to be aware.
- As well remove the try to fix the tablet on first boot landscape problem
It actually did not fix the problem.
Settings: FIXED - Settings FC - Wrong fragment class
Settings: Fix null pointer exceptions in NetworkPolicyEditor
- This upload fixes a null pointer exception issue. After this fix the modified methods return their corresponding default values instead of null.
Settings: Bluetooth: Set alias name only through Rename option
- Set the alias name only when user is trying to change the name using the Rename option of paired device.
- CRs-Fixed: 539420
Settings: Bluetooth: Don't set a null alias before unpairing
- This causes the unpair action to throw a null pointer exception and bring down the Settings app. Don't do this.
smdk4412-common: Add back "smdk4412-common: camera: include support for face detection"
Updated cm source
dl: http://temasek.hopto.org/?dir=Samsung%20Galaxy%20S3%20-%20i9300/CM11.0
B
Bishop- Déterminé
- Date d'inscription : 12/09/2013
Localisation : Grenoble (38)
Humeur : :-)
Messages : 274
Re: [ROM] Archive[i9300] [4.4.2] [KK] Temasek's UNOFFICIAL CM11 BUILD -V131 - 01/09/2014
Build V34
i9300 - md5sum: ff70f8a6039bc3258b98d1b5db46fb72
hltexx - md5sum: c9072afda2f73eb4288c64905a036621
UPLOADING IN-PROGRESS
Pls download 10-15 mins later. I'm going back to sleep...SICK
CHANGELOG SINCE V33
Add temasek bootanimation for 1080 width (N9005) by @PartimusPrime , the creator of temasek CM11 boot animation.
frameworks/base: Fix show notification count
frameworks/base: Don't show notification count for a notification with just one item
- For example, the Play Store sets the number attribute to 1 for a single
app update. No point in showing a counter for that.
frameworks/base: added national roaming info for Tuenti Movil in Spain
- Users of Tuenti Movil in Spain (MCC 214 MNC 05) can roam on Movistar (MCC
214 MNC 07).
frameworks/base: SystemUI: Extra Temasek Shortcuts && Cleanup
Some cleanup of temasek shortcuts
& implement method to allow
user to toggle toggleable
settings to the preferred state.
Much easier to use with confidence
knowing you'll be in the correct state.
frameworks/base: Show owner info creation if no owner is set for UserTile
Forward port from cm-10.2.
Squash of the following commits:
Show owner info creation if no owner is set for UserTile
Change-Id: I43575946023676a1b75b67e1ae1996a0a3a35b88
Fix showing owner info creation from UserTile if no owner is set
* Turns out the default user will always be present, meaning a check of
user count == 0 fails.
Change-Id: Id8e8e75c5f51c73a60d7b9039298ecb90e572bc9
Show default profile name if no profile exists
Change-Id: I6b651d6b552ab3caf30102d289469eaf68f58a0e
UserTile : Check if profile has a photo
In the event that the profile doesn't have a photo, don't default to the
user's photo, instead show a default avatar.
Change-Id: I80de324ae1e151693cf3716bf87d39a16096ca12
frameworks/base: ExternalStorageProvider: use mount point in device list
- For me its is extremely unlogical that only the volume label is used in the device list. Even more because it can be an empty string and for a normal android user this information is not visible anywhere else.
- Using the mount point and if available the device label separated by "-" makes much more sense and shows the same information as all other apps that access external storage
frameworks/base: Harden against transiently unavailable backup transports
- The init & clear operations are particularly important to ensure delivery when at all possible, so we retry those periodically if the transport is unavailable when we first attempt them.
- Now with 100% less build break.
Add "Flip to Mute/Reject Call"
- Default disabled
- To enable, proceed to dialer settings
Add "QuickSettings : Quick Collapse"
Add "Minimum Vibration Duration"
Add "Get Shortcut Name"
Chamber of Secrets:
Allow user to set intent name.
This allows the intent to show up,
for example, in custom tiles with
a name that makes sense to the user.
Settings: Clean up SeekBar && Fine LongPress (1/1)
SeekBarPreference:
-Way too many unused
values that only complicated things.
onProgressChanged is called to update
the summary without issue.
-Set future-proofing else {} to set the
monitor box to JUST the progress value.
-Set a "default" string @ int setting.
-Set minimum Value method
-Set a multiplier method to multiply
value / summary.
Accessibility:
Fine adjustment of long-press
duration.
Settings: Adds ability to answer call with hardware HOME button
- preparation to winter time
Settings: use CMHW serial number
Settings: Settings : Update gesture preference check
- Move the gesture outside the stylus dependency check and remove the preference category if no children are found
InCallUI: Set Ticker to contact
- Display contact/number/confrence in notification ticker.
Updated cm source
B
i9300 - md5sum: ff70f8a6039bc3258b98d1b5db46fb72
hltexx - md5sum: c9072afda2f73eb4288c64905a036621
UPLOADING IN-PROGRESS
Pls download 10-15 mins later. I'm going back to sleep...SICK
CHANGELOG SINCE V33
Add temasek bootanimation for 1080 width (N9005) by @PartimusPrime , the creator of temasek CM11 boot animation.
frameworks/base: Fix show notification count
frameworks/base: Don't show notification count for a notification with just one item
- For example, the Play Store sets the number attribute to 1 for a single
app update. No point in showing a counter for that.
frameworks/base: added national roaming info for Tuenti Movil in Spain
- Users of Tuenti Movil in Spain (MCC 214 MNC 05) can roam on Movistar (MCC
214 MNC 07).
frameworks/base: SystemUI: Extra Temasek Shortcuts && Cleanup
Some cleanup of temasek shortcuts
& implement method to allow
user to toggle toggleable
settings to the preferred state.
Much easier to use with confidence
knowing you'll be in the correct state.
frameworks/base: Show owner info creation if no owner is set for UserTile
Forward port from cm-10.2.
Squash of the following commits:
Show owner info creation if no owner is set for UserTile
Change-Id: I43575946023676a1b75b67e1ae1996a0a3a35b88
Fix showing owner info creation from UserTile if no owner is set
* Turns out the default user will always be present, meaning a check of
user count == 0 fails.
Change-Id: Id8e8e75c5f51c73a60d7b9039298ecb90e572bc9
Show default profile name if no profile exists
Change-Id: I6b651d6b552ab3caf30102d289469eaf68f58a0e
UserTile : Check if profile has a photo
In the event that the profile doesn't have a photo, don't default to the
user's photo, instead show a default avatar.
Change-Id: I80de324ae1e151693cf3716bf87d39a16096ca12
frameworks/base: ExternalStorageProvider: use mount point in device list
- For me its is extremely unlogical that only the volume label is used in the device list. Even more because it can be an empty string and for a normal android user this information is not visible anywhere else.
- Using the mount point and if available the device label separated by "-" makes much more sense and shows the same information as all other apps that access external storage
frameworks/base: Harden against transiently unavailable backup transports
- The init & clear operations are particularly important to ensure delivery when at all possible, so we retry those periodically if the transport is unavailable when we first attempt them.
- Now with 100% less build break.
Add "Flip to Mute/Reject Call"
- Default disabled
- To enable, proceed to dialer settings
Add "QuickSettings : Quick Collapse"
Add "Minimum Vibration Duration"
Add "Get Shortcut Name"
Chamber of Secrets:
Allow user to set intent name.
This allows the intent to show up,
for example, in custom tiles with
a name that makes sense to the user.
Settings: Clean up SeekBar && Fine LongPress (1/1)
SeekBarPreference:
-Way too many unused
values that only complicated things.
onProgressChanged is called to update
the summary without issue.
-Set future-proofing else {} to set the
monitor box to JUST the progress value.
-Set a "default" string @ int setting.
-Set minimum Value method
-Set a multiplier method to multiply
value / summary.
Accessibility:
Fine adjustment of long-press
duration.
Settings: Adds ability to answer call with hardware HOME button
- preparation to winter time
Settings: use CMHW serial number
Settings: Settings : Update gesture preference check
- Move the gesture outside the stylus dependency check and remove the preference category if no children are found
InCallUI: Set Ticker to contact
- Display contact/number/confrence in notification ticker.
Updated cm source
B
Bishop- Déterminé
- Date d'inscription : 12/09/2013
Localisation : Grenoble (38)
Humeur : :-)
Messages : 274
Re: [ROM] Archive[i9300] [4.4.2] [KK] Temasek's UNOFFICIAL CM11 BUILD -V131 - 01/09/2014
Merci B pour l'info...
Invité- Invité
Re: [ROM] Archive[i9300] [4.4.2] [KK] Temasek's UNOFFICIAL CM11 BUILD -V131 - 01/09/2014
V35 dispo avec la fonction de notification sur le Lockscreen
Build V35
Lockscreen see through & blur -> Security
Lockscreen Notifications -> Temasek Spare Parts -> Screen & animations -> Lockscreen notifications
NOTE: If you enable Active Display, do NOT enable Lockscreen Notifications and vice versa.
Changelog
Add temasek bootanimation for 1080 width (N9005) by @PartimusPrime , the creator of temasek CM11 boot animation.
frameworks/base: Fix show notification count
frameworks/base: Don't show notification count for a notification with just one item
- For example, the Play Store sets the number attribute to 1 for a single
app update. No point in showing a counter for that.
frameworks/base: added national roaming info for Tuenti Movil in Spain
- Users of Tuenti Movil in Spain (MCC 214 MNC 05) can roam on Movistar (MCC
214 MNC 07).
frameworks/base: SystemUI: Extra Temasek Shortcuts && Cleanup
Some cleanup of temasek shortcuts
& implement method to allow
user to toggle toggleable
settings to the preferred state.
Much easier to use with confidence
knowing you'll be in the correct state.
frameworks/base: Show owner info creation if no owner is set for UserTile
Forward port from cm-10.2.
Squash of the following commits:
Show owner info creation if no owner is set for UserTile
Change-Id: I43575946023676a1b75b67e1ae1996a0a3a35b88
Fix showing owner info creation from UserTile if no owner is set
* Turns out the default user will always be present, meaning a check of
user count == 0 fails.
Change-Id: Id8e8e75c5f51c73a60d7b9039298ecb90e572bc9
Show default profile name if no profile exists
Change-Id: I6b651d6b552ab3caf30102d289469eaf68f58a0e
UserTile : Check if profile has a photo
In the event that the profile doesn't have a photo, don't default to the
user's photo, instead show a default avatar.
Change-Id: I80de324ae1e151693cf3716bf87d39a16096ca12
frameworks/base: ExternalStorageProvider: use mount point in device list
- For me its is extremely unlogical that only the volume label is used in the device list. Even more because it can be an empty string and for a normal android user this information is not visible anywhere else.
- Using the mount point and if available the device label separated by "-" makes much more sense and shows the same information as all other apps that access external storage
frameworks/base: Harden against transiently unavailable backup transports
- The init & clear operations are particularly important to ensure delivery when at all possible, so we retry those periodically if the transport is unavailable when we first attempt them.
- Now with 100% less build break.
Add "Flip to Mute/Reject Call"
- Default disabled
- To enable, proceed to dialer settings
Add "QuickSettings : Quick Collapse"
Add "Minimum Vibration Duration"
Add "Get Shortcut Name"
Chamber of Secrets:
Allow user to set intent name.
This allows the intent to show up,
for example, in custom tiles with
a name that makes sense to the user.
Settings: Clean up SeekBar && Fine LongPress (1/1)
SeekBarPreference:
-Way too many unused
values that only complicated things.
onProgressChanged is called to update
the summary without issue.
-Set future-proofing else {} to set the
monitor box to JUST the progress value.
-Set a "default" string @ int setting.
-Set minimum Value method
-Set a multiplier method to multiply
value / summary.
Accessibility:
Fine adjustment of long-press
duration.
Settings: Adds ability to answer call with hardware HOME button
- preparation to winter time
Settings: use CMHW serial number
Settings: Settings : Update gesture preference check
- Move the gesture outside the stylus dependency check and remove the preference category if no children are found
InCallUI: Set Ticker to contact
- Display contact/number/confrence in notification ticker.
Updated cm source
B
Build V35
Lockscreen see through & blur -> Security
Lockscreen Notifications -> Temasek Spare Parts -> Screen & animations -> Lockscreen notifications
NOTE: If you enable Active Display, do NOT enable Lockscreen Notifications and vice versa.
Changelog
Add temasek bootanimation for 1080 width (N9005) by @PartimusPrime , the creator of temasek CM11 boot animation.
frameworks/base: Fix show notification count
frameworks/base: Don't show notification count for a notification with just one item
- For example, the Play Store sets the number attribute to 1 for a single
app update. No point in showing a counter for that.
frameworks/base: added national roaming info for Tuenti Movil in Spain
- Users of Tuenti Movil in Spain (MCC 214 MNC 05) can roam on Movistar (MCC
214 MNC 07).
frameworks/base: SystemUI: Extra Temasek Shortcuts && Cleanup
Some cleanup of temasek shortcuts
& implement method to allow
user to toggle toggleable
settings to the preferred state.
Much easier to use with confidence
knowing you'll be in the correct state.
frameworks/base: Show owner info creation if no owner is set for UserTile
Forward port from cm-10.2.
Squash of the following commits:
Show owner info creation if no owner is set for UserTile
Change-Id: I43575946023676a1b75b67e1ae1996a0a3a35b88
Fix showing owner info creation from UserTile if no owner is set
* Turns out the default user will always be present, meaning a check of
user count == 0 fails.
Change-Id: Id8e8e75c5f51c73a60d7b9039298ecb90e572bc9
Show default profile name if no profile exists
Change-Id: I6b651d6b552ab3caf30102d289469eaf68f58a0e
UserTile : Check if profile has a photo
In the event that the profile doesn't have a photo, don't default to the
user's photo, instead show a default avatar.
Change-Id: I80de324ae1e151693cf3716bf87d39a16096ca12
frameworks/base: ExternalStorageProvider: use mount point in device list
- For me its is extremely unlogical that only the volume label is used in the device list. Even more because it can be an empty string and for a normal android user this information is not visible anywhere else.
- Using the mount point and if available the device label separated by "-" makes much more sense and shows the same information as all other apps that access external storage
frameworks/base: Harden against transiently unavailable backup transports
- The init & clear operations are particularly important to ensure delivery when at all possible, so we retry those periodically if the transport is unavailable when we first attempt them.
- Now with 100% less build break.
Add "Flip to Mute/Reject Call"
- Default disabled
- To enable, proceed to dialer settings
Add "QuickSettings : Quick Collapse"
Add "Minimum Vibration Duration"
Add "Get Shortcut Name"
Chamber of Secrets:
Allow user to set intent name.
This allows the intent to show up,
for example, in custom tiles with
a name that makes sense to the user.
Settings: Clean up SeekBar && Fine LongPress (1/1)
SeekBarPreference:
-Way too many unused
values that only complicated things.
onProgressChanged is called to update
the summary without issue.
-Set future-proofing else {} to set the
monitor box to JUST the progress value.
-Set a "default" string @ int setting.
-Set minimum Value method
-Set a multiplier method to multiply
value / summary.
Accessibility:
Fine adjustment of long-press
duration.
Settings: Adds ability to answer call with hardware HOME button
- preparation to winter time
Settings: use CMHW serial number
Settings: Settings : Update gesture preference check
- Move the gesture outside the stylus dependency check and remove the preference category if no children are found
InCallUI: Set Ticker to contact
- Display contact/number/confrence in notification ticker.
Updated cm source
B
Bishop- Déterminé
- Date d'inscription : 12/09/2013
Localisation : Grenoble (38)
Humeur : :-)
Messages : 274
Re: [ROM] Archive[i9300] [4.4.2] [KK] Temasek's UNOFFICIAL CM11 BUILD -V131 - 01/09/2014
Merci B pour l'info...
Invité- Invité
Re: [ROM] Archive[i9300] [4.4.2] [KK] Temasek's UNOFFICIAL CM11 BUILD -V131 - 01/09/2014
Build V36
i9300 - md5sum: 493447ff027d7a869dff085070c48ea1
hltexx - md5sum: 9a9215a7e62ab94eeab0daf523c65725
FIXED - Settings FC on Security -> Screen Lock
FIXED - Settings FC on Temasek spare parts -> Notification & QS drawer -> Style
Add "Custom Carrier Label"
Add "Pimp up Notification Labels Hide"
This adds fine grain priorities to hide the labels in the notification
drawer in the following ways:
- Show all Labels
- Hide Carrier Label
- Hide WiFI Lable
- Hide all Labels
Add "Add option to always show battery status on lockscreen"
Add "Lockscreen Glowpad Torch"
frameworks/base: added national roaming for Noverca in Italia
frameworks/base: added national roaming for BSNL in India
frameworks/base: more fix Active Display (again)
- maybe fix
- http://jira.omnirom.org/browse/OMNI-313
- http://jira.omnirom.org/browse/OMNI-421
- http://jira.omnirom.org/browse/OMNI-401
frameworks/base: alarms: clean up duplicated sounds
- another mess...
Alarm_Classic == Oxygen == Cesium
Promethium == Platinum
Argon == Fermium
Nobelium == Neon
Helium == Hassium
Plutonium == Krypton
Neptunium == Carbon
frameworks/base: FIX LTE QS Toggle
frameworks/base: Keyguard: don't refresh ui when screen off
- KeyguardStatusView is doing refresh all the time, which cause high power when screen off. ( MORE POWER SAVINGS !!! )
frameworks/base: ProcessList: use different polling interval when screen off
- We are using the same time interval for both screen off and screen on.
For process on top: ActivityManager.PROCESS_STATE_TOP, we will poll PSS
information every 120 sec.
- During polling PSS, we are grep /proc/%d/smaps which is a 10k lines file.
This cost quite a lot of CPU resource. But when screen off, we don't need to update TOP process PSS so frequently since we are not operating it. Lower polling circle to every 15min to reduce power. ( MORE POWER SAVINGS !!! )
frameworks/base: UI not updated correctly in expanded statusbar
- Sometimes when getting status changes in expanded statusbar the text disappear. Both NetworkController and PhoneStatusBar handles UI updates and they are not in sync. This fix allows PhoneStatusBar to update UI when NetworkController is updating the UI.
frameworks/base: onAccountsUpdated shouldn't be called back after listener unregistered
- There is a problem of AccountManager that onAccountsUpdated() is called back even after the OnAccountsUpdatedListener is unregistered. It may cause application crash.
- For example, when rotating a tablet 180 degree with Settings apk running, com.android.settings.Settings is re-launched 2 times successively. (Destroy->Create->Destroy->Create) It repeats adding&removing OnAccountUpdatedListener.
- When dialog was being opened in the following cases, NullPointerException at BackStackRecord.getBreadCrumbTitle() was happened on 10 inch tablet which has 2 panes on Settings.
* Settings > Language&input > Language
* Settings > Language & input > Text-to-speech output > Speech rate
* Settings > Wi-Fi > Menu > Advanced > Keep Wi-Fi on during sleep
* Settings > Wi-Fi > Menu > Wi-Fi Direct > Rename device
- This fix prevents the undesirable callback.
frameworks/base: Fix wrong IME state handlings on keyboard switches
- We assumed that calling updateFromSettingsLocked(true) is in all value changes a possible way to simplify the process. In reality this fails when the user switches eg between 2 IME keyboards several times due that we call every
time mIPackageManager.setApplicationEnabledSetting(imm. getPackageName(),
PackageManager.COMPONENT_ENABLED_STATE_DEFAULT, PackageManager.DONT_KILL_APP, mSettings.getCurrentUserId(),
mContext.getBasePackageName());
which results in wrong mCurMethodId which ends in method calling which should not be called and result in an NPE and hotreboot due of dieing service.
- To fix it go only for showinputmethod feature the old way and restore for all other value changes AOSP behaviour and check specifically if enabledChanged is true or not based on the getEnabledInputMethodsStr() method during we lock on mMethodMap
frameworks/base: Keyguard: do not allow to delete the system widget if widgets are disabled
- We overwrite the default widget with our own one. In this case it is detected
as a normal widget even though it widgets are disabled and starts listening to
longpress events
- Whatever check if widgets are disabled. If this is the case do not allow any
longpress events
frameworks/base: Fix preference puts with "null" values.
- Null values were being written out as
frameworks/base: MountService listeners can not be unregistered
- When unregistering MountService listeners, their Binder proxy objects were compared to registered listeners instead of their backing objects.
frameworks/base: Add NULL check in updateProxyConfig
- If the exclusionList was null in updateProxyConfig the VM would crash when converting it to a UTF8 string. Avoid this by adding a null check.
frameworks/base: Before requerying a cursor, check if it is closed.
- Before updating a cursor, it needs to be checked if it is valid. Currently a defence code only checks if it is not null.
- But in case of "Cursor", it is not valid, if it is closed. So just like in CursorAdapter.onContentChanged(), add the additional defence code to check validation.
frameworks/base: Revert "ExternalStorageProvider: use mount point in device list"
Settings: Make Privacy Guard a first class citizen in the Settings app.
Settings: Fix up top level "Privacy" section
Settings: Fix NPE with null check on NFC adapter
- Verifies the adapter is not null before dereferencing it and log and error if so
Settings: Fix Bug Tile Size
- As reported very well by user Natakranta:
- http://forum.xda-developers.com/show...9#post49457919
- Layout files will take care of scaling down in this case.
Settings: Fix clock font style default setting
Updated cm source
Temasek - i9300 - v36 - 17/01/2014
Post-it- Confirmé
- Age : 51
Date d'inscription : 23/09/2013
Messages : 7320
Re: [ROM] Archive[i9300] [4.4.2] [KK] Temasek's UNOFFICIAL CM11 BUILD -V131 - 01/09/2014
Merci post-it....
Invité- Invité
Re: [ROM] Archive[i9300] [4.4.2] [KK] Temasek's UNOFFICIAL CM11 BUILD -V131 - 01/09/2014
Build V37
i9300 - md5sum: b4e8c7f8df7c017a67921d4f998b7e9e
Some features I wanna port were held back because it wasn't successful. I'll attempt it in the near future. To prevent holding back further, I have released V37.
Surprisingly the screen recorder WORKS in i9300. It lags abit but working as it should.
CHANGELOG SINCE V36
hlte-common: actually build the crda service
smdk4412-common: Revert "camera: include support for face detection"
HALO update - PA
- frameworks/base: patchset update from 4 -> 9
- Settings: patchset update from4 -> 8
Add "Screen recorder + ability to record audio from mic" - ChameleonOS
- Screen recorder settings -> Display Settings -> Screen recorder
- 2 ways to activate screen recorder
--> Power key + volume up
--> Power menu (Long press power button). You have to enable screen recorder via Settings -> Buttons -> Global Menu -> Tick "Screen Recorder"
Add "HALO: make windows moveable and scaleable [WIP]" - PA
Add "Breathing missedcall/sms/voicemail" - OmniROM
- Temasek spare parts -> Omni Features
Add "Quiet Hours: Allow disabling phone ringer" - CM
Add "Smart Pulldown" - SlimROM
- Adds the ability to directly open the QS panel when there are no notifications present in the notification panel. This commit combines the enhancement by HardCorePawn for detecting notification types for the same.
-- Credits: kufikugel, HardCorePawn
Add "Always show battery on Keyguard" - SlimROM
- Based on the feature by burnsra in CM7
- Authored by Blunden
- Tweaked by DvTonder
- Tweaked by kufikugel
frameworks/base: added national roaming info for Simyo in Spain
- Users of Simyo in Spain (MCC214 MNC09 and MCC214 MNC19) can roam on Orange (MCC214 MNC03).
frameworks/base: added national roaming info for Spring Mobil in Sweden...
Spring Mobil users in Sweden (MCC 240, MNC 10) can roam on Sweden 3G (MNC 05) and on Sweden 2G (MNC 24).
frameworks/base: Revert "Show owner info creation if no owner is set for UserTile"
frameworks/base: clean up our and AOSP code for wifi and carrier label animation - SlimROM
- we introduced with this AOSP commit SlimRoms/frameworks_base@288e3ec
the ability to keep wifi and carrier label up to date on every network change which happens. The big advantage of this change is that all the calls for updating the label which are present in PhoneStatusBar are not needed anymore. We can reduce it to call only when we have animations in progress or if notifications update and we must decide if the label is still visible or not. This are way less animation calls then before and on clean AOSP
- As well clean up some of our old code which workaround all this calls.
- This commit fixes two present minor issues
--> carrier label was visible behind notifications (AOSP behaviour but conflicts with our transparency settings)
--> due of new updatehandling it happened sometimes that on switching to QS the label was a bit to long visible
--> animations are now completly always in sync
frameworks/base: add bottom margin to stock default battery icon - SlimROM
- We set the layout parameters programmatically so the fix from google does not take effect. To solve set the bottom margin programmatically based on the current display density
frameworks/base: Fix 0% battery QS tile - SlimROM
- when tile is recreated. Fetch the values from BatteryController
frameworks/base: Keyguard: fix codestyle - SlimROM
frameworks/base: disable navigation bar camera button if widget carousel is enabled - SlimROM
- Beside that the animation which starts when dragging the camera icon
to the left is broken if the user has enabled carousel animation like tablets it does not feel natural even when we use the right animation for it.
- So disable the camera button in this case and allow only swiping the camera widget on carousel mode
frameworks/base: Keyguard disable challenge drag down on simpin/simpuk screen - SlimROM
- On simpin, simpuck and as well account change screen it does not make any sense to give the user the abillity to drag down the challenge to show the widget maximized (neither if widgets are enabled or disabled)
- Reason: simpin/simpuck widget is not shown due of security reasons and on account change the next expected behaviour is that the user gets a new setup. So it does not make in this case as well sense
- Just check for current securityscreen selection to block this behaviour. As
well move the enable/disable code to a proper place
frameworks/base: force carrier label height on first boot - SlimROM
reported tester issue:
- boot up
- pull down QS before any network action was done
- carrier/wifi label is shown on qs
Expected behaviour: should not show up on QS in any cases
Fix: force hide on first statusbar construct
seems to be in rare cases this update is needed to avoid showing the carrier
label on QS on first boot up and no connection is there hence emergency label
is shown
Settings: Fix LTO availability check.
Settings: Fix confusing warning dialog behaviour.
- The settings app closing when pressing back while the dialog is shown or
clicking outside of the dialog was confusing for the user. Instead, make sure the user has to acknowledge the dialog.
Settings: Make CM Settings visible for users other than the owner
InCallUI - Revert "Revert "Make incall screen glopad background themeable""
- This reverts commit 93821a4.
Vendor/cm: Revert "spn-conf: add localized carrier spns"
- This reverts commit 8f49a12.
Updated cm source
B
i9300 - md5sum: b4e8c7f8df7c017a67921d4f998b7e9e
Some features I wanna port were held back because it wasn't successful. I'll attempt it in the near future. To prevent holding back further, I have released V37.
Surprisingly the screen recorder WORKS in i9300. It lags abit but working as it should.
CHANGELOG SINCE V36
hlte-common: actually build the crda service
smdk4412-common: Revert "camera: include support for face detection"
HALO update - PA
- frameworks/base: patchset update from 4 -> 9
- Settings: patchset update from4 -> 8
Add "Screen recorder + ability to record audio from mic" - ChameleonOS
- Screen recorder settings -> Display Settings -> Screen recorder
- 2 ways to activate screen recorder
--> Power key + volume up
--> Power menu (Long press power button). You have to enable screen recorder via Settings -> Buttons -> Global Menu -> Tick "Screen Recorder"
Add "HALO: make windows moveable and scaleable [WIP]" - PA
Add "Breathing missedcall/sms/voicemail" - OmniROM
- Temasek spare parts -> Omni Features
Add "Quiet Hours: Allow disabling phone ringer" - CM
Add "Smart Pulldown" - SlimROM
- Adds the ability to directly open the QS panel when there are no notifications present in the notification panel. This commit combines the enhancement by HardCorePawn for detecting notification types for the same.
-- Credits: kufikugel, HardCorePawn
Add "Always show battery on Keyguard" - SlimROM
- Based on the feature by burnsra in CM7
- Authored by Blunden
- Tweaked by DvTonder
- Tweaked by kufikugel
frameworks/base: added national roaming info for Simyo in Spain
- Users of Simyo in Spain (MCC214 MNC09 and MCC214 MNC19) can roam on Orange (MCC214 MNC03).
frameworks/base: added national roaming info for Spring Mobil in Sweden...
Spring Mobil users in Sweden (MCC 240, MNC 10) can roam on Sweden 3G (MNC 05) and on Sweden 2G (MNC 24).
frameworks/base: Revert "Show owner info creation if no owner is set for UserTile"
frameworks/base: clean up our and AOSP code for wifi and carrier label animation - SlimROM
- we introduced with this AOSP commit SlimRoms/frameworks_base@288e3ec
the ability to keep wifi and carrier label up to date on every network change which happens. The big advantage of this change is that all the calls for updating the label which are present in PhoneStatusBar are not needed anymore. We can reduce it to call only when we have animations in progress or if notifications update and we must decide if the label is still visible or not. This are way less animation calls then before and on clean AOSP
- As well clean up some of our old code which workaround all this calls.
- This commit fixes two present minor issues
--> carrier label was visible behind notifications (AOSP behaviour but conflicts with our transparency settings)
--> due of new updatehandling it happened sometimes that on switching to QS the label was a bit to long visible
--> animations are now completly always in sync
frameworks/base: add bottom margin to stock default battery icon - SlimROM
- We set the layout parameters programmatically so the fix from google does not take effect. To solve set the bottom margin programmatically based on the current display density
frameworks/base: Fix 0% battery QS tile - SlimROM
- when tile is recreated. Fetch the values from BatteryController
frameworks/base: Keyguard: fix codestyle - SlimROM
frameworks/base: disable navigation bar camera button if widget carousel is enabled - SlimROM
- Beside that the animation which starts when dragging the camera icon
to the left is broken if the user has enabled carousel animation like tablets it does not feel natural even when we use the right animation for it.
- So disable the camera button in this case and allow only swiping the camera widget on carousel mode
frameworks/base: Keyguard disable challenge drag down on simpin/simpuk screen - SlimROM
- On simpin, simpuck and as well account change screen it does not make any sense to give the user the abillity to drag down the challenge to show the widget maximized (neither if widgets are enabled or disabled)
- Reason: simpin/simpuck widget is not shown due of security reasons and on account change the next expected behaviour is that the user gets a new setup. So it does not make in this case as well sense
- Just check for current securityscreen selection to block this behaviour. As
well move the enable/disable code to a proper place
frameworks/base: force carrier label height on first boot - SlimROM
reported tester issue:
- boot up
- pull down QS before any network action was done
- carrier/wifi label is shown on qs
Expected behaviour: should not show up on QS in any cases
Fix: force hide on first statusbar construct
seems to be in rare cases this update is needed to avoid showing the carrier
label on QS on first boot up and no connection is there hence emergency label
is shown
Settings: Fix LTO availability check.
Settings: Fix confusing warning dialog behaviour.
- The settings app closing when pressing back while the dialog is shown or
clicking outside of the dialog was confusing for the user. Instead, make sure the user has to acknowledge the dialog.
Settings: Make CM Settings visible for users other than the owner
InCallUI - Revert "Revert "Make incall screen glopad background themeable""
- This reverts commit 93821a4.
Vendor/cm: Revert "spn-conf: add localized carrier spns"
- This reverts commit 8f49a12.
Updated cm source
B
Bishop- Déterminé
- Date d'inscription : 12/09/2013
Localisation : Grenoble (38)
Humeur : :-)
Messages : 274
Re: [ROM] Archive[i9300] [4.4.2] [KK] Temasek's UNOFFICIAL CM11 BUILD -V131 - 01/09/2014
Merci B.....
Invité- Invité
Re: [ROM] Archive[i9300] [4.4.2] [KK] Temasek's UNOFFICIAL CM11 BUILD -V131 - 01/09/2014
Build V37.1
md5sum: 426785960caa429ab79194352ec8f65d
- Revert HALO back to V36 status
- Updated cm sources
Update this if you are really bothered by the recent update of HALO.
Available in my hopto download site only.
B
md5sum: 426785960caa429ab79194352ec8f65d
- Revert HALO back to V36 status
- Updated cm sources
Update this if you are really bothered by the recent update of HALO.
Available in my hopto download site only.
B
Bishop- Déterminé
- Date d'inscription : 12/09/2013
Localisation : Grenoble (38)
Humeur : :-)
Messages : 274
Re: [ROM] Archive[i9300] [4.4.2] [KK] Temasek's UNOFFICIAL CM11 BUILD -V131 - 01/09/2014
Build V40
MD5: c6aec8169ac2b40b25b0dd3040984923
Build V40 TINY Update #1
FIXED - white on white background of dialpad while on TRDS
Message du Dev.
"I'm taking a break off xda. This is my last for awhile.
Till then, enjoy."
Source Bishop sur TM******.....
Post-it- Confirmé
- Age : 51
Date d'inscription : 23/09/2013
Messages : 7320
Re: [ROM] Archive[i9300] [4.4.2] [KK] Temasek's UNOFFICIAL CM11 BUILD -V131 - 01/09/2014
Merci Post it pour la MAJ!
Re: [ROM] Archive[i9300] [4.4.2] [KK] Temasek's UNOFFICIAL CM11 BUILD -V131 - 01/09/2014
Merci post-it pour la MAJ...
Invité- Invité
Re: [ROM] Archive[i9300] [4.4.2] [KK] Temasek's UNOFFICIAL CM11 BUILD -V131 - 01/09/2014
Salut,
Pour infos, le" break" et non la "fin" de Teamasek se confirme, suite à un départ en famille pour singapoor...les MAJ seront (-) fréquentes que d'hab je crois :triste1:
"The moment of truth,
In a few days time is my Chinese New Year in Singapore. I'll be busy eating & having fun with my family so I won't be active.
I'm a bit upset on expectations by minority users but hey I'm a mortal with feelings. I'll try to calm myself....
Later guys
Regards
Temasek"
source XDA: http://forum.xda-developers.com/showthread.php?p=49807200
*************************************************************************
[size=150]Attention!!![/size]
*** IMPORTANT NOTE ***
Build V41 (coming soon)
Pour infos, le" break" et non la "fin" de Teamasek se confirme, suite à un départ en famille pour singapoor...les MAJ seront (-) fréquentes que d'hab je crois :triste1:
"The moment of truth,
In a few days time is my Chinese New Year in Singapore. I'll be busy eating & having fun with my family so I won't be active.
I'm a bit upset on expectations by minority users but hey I'm a mortal with feelings. I'll try to calm myself....
Later guys
Regards
Temasek"
source XDA: http://forum.xda-developers.com/showthread.php?p=49807200
*************************************************************************
[size=150]Attention!!![/size]
*** IMPORTANT NOTE ***
Build V41 (coming soon)
- changelogs:
When you boot up, first thing is to rebind your hardware keys via
navigation -> Hardware Buttons
Rebind all your home/menu/back buttons
( Normal press , Long press , Double tap )**********************************************************
Et le long changelog:
[size=150]Build V41[/size]
i9300 - md5sum: e967cee0bee79432b4e7612b15edb43d
hltexx - md5sum: b7bbaf7a9bf22d3a5435e6e5ce480dce
Quote:
IMPORTANT
Once boot-up pls proceed to navigation -> Hardware Buttons and check your settings (rebind it if necessary)
B
modération:Changelogs mis en cache
Bishop- Déterminé
- Date d'inscription : 12/09/2013
Localisation : Grenoble (38)
Humeur : :-)
Messages : 274
Post-it- Confirmé
- Age : 51
Date d'inscription : 23/09/2013
Messages : 7320
Re: [ROM] Archive[i9300] [4.4.2] [KK] Temasek's UNOFFICIAL CM11 BUILD -V131 - 01/09/2014
Cool post-it....
Invité- Invité
Re: [ROM] Archive[i9300] [4.4.2] [KK] Temasek's UNOFFICIAL CM11 BUILD -V131 - 01/09/2014
Build V42
hltexx - md5sum: a8c3cefd37834d7c48ead74b43f6e2c0
i9300 - md5sum: 05c9cda8069a063137f122dd8af82042
hltexx - md5sum: a8c3cefd37834d7c48ead74b43f6e2c0
i9300 - md5sum: 05c9cda8069a063137f122dd8af82042
- changelogs:
IMPORTANT
Those on navigation bar, pls proceed to redo your navigation dimensions as there are new updates to this.
Navigation -> Navigation bar -> Dimensions
Bishop- Déterminé
- Date d'inscription : 12/09/2013
Localisation : Grenoble (38)
Humeur : :-)
Messages : 274
Re: [ROM] Archive[i9300] [4.4.2] [KK] Temasek's UNOFFICIAL CM11 BUILD -V131 - 01/09/2014
Build V43
hltexx - md5sum: ed6fc5b5cae2232fc82994940988f8e5
i9300 - md5sum: 082dc3a1787b431137a50efa3a4b8507
CHANGELOG SINCE V42
hltexx - md5sum: ed6fc5b5cae2232fc82994940988f8e5
i9300 - md5sum: 082dc3a1787b431137a50efa3a4b8507
CHANGELOG SINCE V42
- changelogs since V41:
- Add "OmniROM Audio Theme"
- Settings -> Sound -> Sound packs
Sound Packs xda thread- http://forum.xda-developers.com/show....php?t=2630011
Download sound packs from above link and place to your INTERNAL SDCARD under SoundPacks folder. If you don't have this folder, create one.
Add "Connection manager"
- Settings -> Wireless & Network (More...) -> Connection Manager
Screen On Configuration
1. LTE
2. 2G on Wi-Fi
Screen Off Configuration
1. 2G with screen off
2. Time to switch to 2G
3. 3G unlock
Add "Caption detection Toggle" - OmniROM
- Settings -> Wireless & Network (More...) -> Captive portal detection
- Settings -> Wireless & Network (More...) -> Server for captive portal detection
Add "Add Dialer suggestions and reverse lookup" - OmniROM
- Dialer suggestions based on OSM
- Options are turned off by default, can be enabled in Phone > Settings
- Reverse lookup supported countries: US , CH, FR
frameworks/base: Lockscreen Notifications: rewrite add notification logic
- There were some problems with notifications getting replaced while the user was currently dragging them. This commit should fix that by always waiting until animations and user input are finished before replacing a notification view.
frameworks/base: Vpn: Setup routes
frameworks/base: Prevent MediaScanner infinite loop with invalid path
- including double slash "/storage/sdcard0/xx//xxx/xxxx"
frameworks/base: Revert "Fix error checking in MemoryFile." …
- Fix android.os.cts.MemoryFileTest#testLength
frameworks/base: ActivityManager: Fix monkey tests
frameworks/base: fix on tablets notification drawer height on custom image background
- The measurment bases always on the height of the complete view. Due that we set an image as background (does not make a difference if we do it like now with an image view or set the background resource for the complete view) the image is calculated into the measured height as well which leads into the problem the the panel completly opens to the bottom.
- To prevent that measure only the real content and decide based of this value how much the rubberbands should go into action. This will be only done on devices which set a minimum height for the drawer which indicates that we need to measure the content more exactly.
frameworks/base: restore navbar compatibility with several xposed modules
frameworks/base: frameworks: Remove KeyguardTestActivity (Hope systemui improved battery life …)
frameworks/base: Restore ProfileGroup notification override functionality
frameworks/base: storage: Don't list removed volumes in storage list …
- Don't tell apps that USB storage or empty SD slots are available for use. This fixes errors about trying to create dirs in vold as well as the relevant CTS cases.
frameworks/base: AppOps: fix allow/reject counting …
- Was missing from the original counters commit: http://review.cyanogenmod.org/#/c/57352/
frameworks/base: Quick Record Tile Save Location …
- Quick Record Tile now saves the file in Podcast folder inside your SDCard.
frameworks/base: Fix NPE causing a hot reboot when pressing power button
frameworks/base: SUPL early data connection fix …
- if GPS started before data connection is alive, SUPL will be broken for entire power cycle.
frameworks/base: Increase overall scroll smoothness
frameworks/base: GlobalActions: Set the initial status of airplane mode toggle …
Actually, the initial status of airplane mode toggle is set to false
when the power menu dialog is initialized.
- This causes an issue if you set airplane mode and then reboot. After the reboot, the dialog displays the wrong airplane mode status, eg. "Airplane mode is not active", and if you toggle that option, a wrong intent is sent again to put ON the airplane mode, instead of OFF, the toggle (that is in transition state) will be set disabled.
- This commit fixes this issue.
frameworks/base: Add Fast Charge QS Tile …
- This includes a file observer to watch the sysfs file change
frameworks/base: Speedup kill app timeout delay
- from 2000ms to 1000ms
frameworks/base: Fix for the race in Wallpaperservice …
- Wallpaperservice has a race among message handler of DO_DETACH and service's onDestroy. In certain cases, the engine kept track in mActiveEngines is removed by message handler of DO_DETACH and service's onDestroy
doesn't get a entry in mActivieEngines and isn't able to invoke detach. This keeps the broadcast receiver, mReceiver active and is unregistered by the framework and a corresponding leak is reported.
- Later, the message handler of DO_DETACH continues and invokes detach on mEngine, which attempts to unregister mReceiver and framework throws an exception "Receiver not registered: android.service.wallpaper.
WallpaperService$Engine$1@40874580" and causes the framework to reboot.
- In case of system_server, WindownManagerPolicy and android.server.ServerThread contest for access of shared members, mActiveEngines and mEgine. Fix is to protect the critical section via synchronized block.
Settings: Don't crash if we pause too quickly
- Notifier is unregistered in every case in pause. However, if you close the Settings app too quick, the notifier might not be registered at all, causing an IllegalArgumentException during the unregistering.
Settings: Enable Back-key when go to Emergency call …
- When go to "Emergency call" from lock screen, back key is disappeared. It is difficult for user to find the way to go back to previous screen. This might be bad user experience. So we are going to make it enable.
Settings: PrivacyGuard: confirm permissions reset …
- The button to reset all application permissions to enabled looks suspiciously like a refresh button. Prompt the user with a confirmation dialog to make sure they know what they've pressed.
Updated cm source
Enjoy!
B :malin1:
Bishop- Déterminé
- Date d'inscription : 12/09/2013
Localisation : Grenoble (38)
Humeur : :-)
Messages : 274
Re: [ROM] Archive[i9300] [4.4.2] [KK] Temasek's UNOFFICIAL CM11 BUILD -V131 - 01/09/2014
Merci B pour le partage...
Invité- Invité
Re: [ROM] Archive[i9300] [4.4.2] [KK] Temasek's UNOFFICIAL CM11 BUILD -V131 - 01/09/2014
Build V45
i9300 - md5sum: 647464a92b0c6d7601579cbc4bd5b468
hltexx - md5sum: 34769584ac5900b6b6a0976785aaed4e
i9300 - md5sum: 647464a92b0c6d7601579cbc4bd5b468
hltexx - md5sum: 34769584ac5900b6b6a0976785aaed4e
- Spoiler:
- Quote:
*** IMPORTANT ***
This instructions are for i9300 / tilapia & grouper only, hlte family not affected.
SlimPIE implementation prior to cm11 was different and as a result affected your preferences and may triggers a Settings FC. When this happens, as a normal user you are required to perform a FULL WIPE.
Who needs a FULL WIPE?
1. Flashing V45 and selecting SlimPIE in Navigation triggers a Settings FC. If you don't use SlimPIE then you don't have to wipe but if you wants SlimPIE then pls backup your apps+data, perform a FULL WIPE and then flash your V45/gapps/kernel again.
Who doesn't needs a FULL WIPE?
1. Flashing V45 and selecting SlimPIE in Navigation does NOT trigger a Settings FC.
CHANGELOG FOR V45
Add "Open source google dialer and more" - SlimROM
This is an open source variant of the well known google Dialer which gives the
ability to show nearby places and revese lookup. It uses default the Google
engine to do this. As well you have the ability to use other providers.
Providers which are currently available:
lookup/nearby places:
Google
OpenStreetMap
Reverse lookup:
Google
OpenCnam (US-only)
WhitePages (US-only)
YellowPages (US-only)
ZabaSearch (US-only)
Add "Lockscreen Notifications: Custom Background color" - AOSB
Revert "ActiveDisplay (rework interface)"
- SystemUI FC on my tilapia
- Will re-visit this later
Revert "Add Dialer suggestions and reverse lookup" - OmniROM
- This revert is to give way to open source dialer.
frameworks/base: EdgeGestureService give abbility to reduce the left and right trigger height if IME shows up
- This patch gives the abbility that features can set the IME_CONTROL flag in addition to the position flags to enable reducing trigger heights on the left and right edge to avoid conflicts with swipe keyboard.
- Although the inputfilter lets come presses to the application trough the normal user behaviour is to start keyboard swiping before they really even pressed the char button which results in conflicts with whatever feature is using the left and right edge as trigger.
- Features who want to use it need to set IME_CONTROL flag. As well if notification drawer was pulled down or global menu is shown on top of the IME keyboard the original size gets restored till they are dismissed/closed
- This patch adds only the support for it.
frameworks/base + Settings: SlimPie give user ability to reduce trigger heights if IME keyboard shows
- Add a user option to reduce left and right trigger of SlimPie if keyboard shows up (especially usefull for swipe keyboard which most keyboards are nowadays). Enabled by default user can disable it in settings.
frameworks/base: TRDS fix possible UI freeze on auto mode change
- only call on theme mode change when auto mode changes. Under special conditions
it can happen that it is called twice
- ensure that whenever a mode change is really done to close the notification shade
- minor cleanup
Browser: blue to grey browser's progress bar - SlimROM
Dialer/Telephony: Add WhitePages Canada reverse lookup provider
Updated cm source
Enjoy!
B ;-)
Bishop- Déterminé
- Date d'inscription : 12/09/2013
Localisation : Grenoble (38)
Humeur : :-)
Messages : 274
Invité- Invité
Re: [ROM] Archive[i9300] [4.4.2] [KK] Temasek's UNOFFICIAL CM11 BUILD -V131 - 01/09/2014
- build V46:
- i9300 - md5sum: 9bf274f85f843d5179e85b81f9ae140a
hltexx - md5sum: a673219d6f40f5f564628b994528baeb
Remember this is a COMBINED changelog for my devices. Also in V46 I didn't state all changelogs as I'm too tired................
Presently its uploading to 4 download sites. Come back later to download. I'm tired...off to sleep!
CHANGELOG SINCE V45
Updated hlte device branch - LATEST 17 FEB
Updated hlte vendor blobs - LATEST 17 FEB
Updated cm kernel sources - LATEST 17 FEB
frameworks/base: Display: Dirty region propagation
- Pass Dirty region values from HW renderer to Surface Texture.
frameworks/base: Revert "Fix stencil buffer bug."
frameworks/base + Settings: Respect and handle shorcut custom icon resources
- If a activity shorcut has an extra icon resource or drawable we need to handle
it. Fix this for all out shortcut features. Most is centralized so a small change
- fix as well to small sizes of custom icons on QS
frameworks/base: add support for translucent volume panel
- Add support for display the volume panel in translucent mode
frameworks/base: TRDS fix possible UI freeze on auto mode change
- only call on theme mode change when auto mode changes. Under special conditions
it can happen that it is called twice
- ensure that whenever a mode change is really done to close the notification shade
- minor cleanup
frameworks/base + Settings: SlimPie give user ability to reduce trigger heights if IME keyboard shows
- Add a user option to reduce left and right trigger of SlimPie if keyboard shows up (especially usefull for swipe keyboard which most keyboards are nowadays). - Enabled by default user can disable it in settings.
frameworks/base: Revert "Make sure to turn off led after pulse()"
- This breaks i9300 notifications light.
frameworks/base + Settings: Lockscreen Notifications: Custom Background color
InCallUI: changing the in call color from semitransparent to semi grey
InCallUI: do not use reflection
Updated cm source - TOO MANY to list.[/hide]
temasek.hopto.org - i9300 / tilapia / grouper / hltexx
Dev-Host i9300 / tilapia / grouper / hltexx
AndroidFileHost - i9300 / hltexx
MediaFire- i9300[/size]
Post-it- Confirmé
- Age : 51
Date d'inscription : 23/09/2013
Messages : 7320
Re: [ROM] Archive[i9300] [4.4.2] [KK] Temasek's UNOFFICIAL CM11 BUILD -V131 - 01/09/2014
:-Post-it-:
Invité- Invité
Re: [ROM] Archive[i9300] [4.4.2] [KK] Temasek's UNOFFICIAL CM11 BUILD -V131 - 01/09/2014
M.A.J. Build v47 (21/02/2014) dispo
Source Bishop Sur T**....
Build V47 : ici
i9300 - md5sum: 11029ee7cce4e583004702885027b86c
hlte - md5sum: fc5f69b4a160986aeceb5c6f69e1fd92
"No added features but lots of under the hood changes. Boot-up dex opt now using multi-cores processing.
I've things to do so I'm unable to wait. Its uploading now so wait a bit."
Post-it- Confirmé
- Age : 51
Date d'inscription : 23/09/2013
Messages : 7320
Re: [ROM] Archive[i9300] [4.4.2] [KK] Temasek's UNOFFICIAL CM11 BUILD -V131 - 01/09/2014
Merci à mon ami @post it pour le suivi :pirat:
Pour infos, Build V50
hlte: md5sum: d5e72d095ef0a76f9ee3968a5223ffc6
i9300: md5sum: 5f53bfd34ad3318ede27882bd6e9f924
CHANGELOG SINCE V49
Pour infos, Build V50
hlte: md5sum: d5e72d095ef0a76f9ee3968a5223ffc6
i9300: md5sum: 5f53bfd34ad3318ede27882bd6e9f924
CHANGELOG SINCE V49
- cliquez ici:
- hlte: V50 comes with temasek kernel v2.04
Add "Change density on the fly" - SlimROM
- Due to possibly my poor porting, I have to inject a SystemUI restart to complete it if not at times the statusbar doesn't get resized.
- This density change WILL SURVIVE reboots & reflashing of ROMS
Add "Wakelock Blocker"
Add "Speed up booting on multicore devices."
1. Add multithreading support to Installer/installd.
2. Parallelize package scanning.
3. Parallelize boot dexopt.
Add "Day and week on data usage"
- Adds the ability to set day and week on when the data usage graph resets, instead of just month.
frameworks/base: Bluetooth: Add SDK apis for Wipower and Peripheral feature
- changes needed for Wipower and Periferal features.
- CRs-fixed: 587811
frameworks/base: Bluetooth: Handle exceptions for bluetoot socket read
- Handled IO exception in read function of BluetootSocket, and also introduced a null check for mSocketIS.
- CRs-Fixed: 605606
frameworks/base: Bluetooth: Add Power apply enable event handling
- Add Wipower Power apply enable related event handling in frameworks
- CRs-fixed: 612628
frameworks/base: Tethering: Skip link local addresses when enabling NAT
- Only one entry is allowed to be added to route table 60 for all interface ipv6 link local addresses, so skip ipv6 link local addresses on all interfaces when enabling NAT
frameworks/base: Structure device not freed in error case …
- In case of an error in the call usb_device_get_fd() the memory created by usb_open_device() is never freed.
- Added a call to usb_device_close in case of error to release the allocated memory.
frameworks/base: Fixed a possible infinite loop in JsonReader#skipValue() …
- Bug: https://code.google.com/p/android/is...etail?id=65846
frameworks/base: Remove java.io.tmpdir assignment in AndroidRuntime. …
- This value is overridden by the framework anyway (see ActivityThread.handleBindApplication). Besides, it doesn't seem like a great idea to let tools clutter /sdcard/ with temp files.
frameworks/base: EGL14.eglCreateWindowSurface should set producerControlledByApp …
- Interface of Surface class changed. To reflect the change for EGL14, add producerControlledByApp flag. Similar change can be seen in 0fa257f
frameworks/base: Release locked buffer when it fails to acquire graphics buffer …
- The JNI buffer in ImageReader_imageSetup is not released when it fails to acquire graphics buffer. After all JNI buffers are exhausted, ACQUIRE_MAX_IMAGES will be returned and leads to error. The JNI buffer should be released when it fails to acquire graphics buffer.
frameworks/base: Add 2 APIs (suspend/resume) in MediaPlayer …
- API:suspend() will just pause the player and release all the decoders
to replace release() which will release the whole player
- API:resume() will just init the decoders again,
then start() will be called to start to play the streaming
frameworks/base: VideoView: Implement the suspend/resume operation in VideoView …
- To use the new APIs (suspend/resume) of MediaPlayer
- Add a new status "SUSPENDED"
frameworks/base: MediaRecorder: Add pause interface …
- add pause in java level
- add pause in jni level
- CRs-Fixed: 587051
frameworks/base: Revert "Added sahlnaskh arabic font and give it higher precedence than DroidNaskh"
frameworks/base: Revert "Added sahlnaskh arabic font to Android.mk & fonts.mk files to actually get the font installed"
frameworks/base: Revert "data usage cycle length"
hlte: Improve boot speed
- Start with noop, finish with ROW. Similar to stock.
hlte: Add custom audio_effects.conf
- Enable offload for visualizer
hlte: hlte: Enable SIM hotswap
- Even though this isn't possible due to the battery location, it is possible for an invalid SIM to cause a persistent modal dialog to be presented upon boot. This works around it.
hlte: Add qcmediaplayer to the build
Updated CM Source - Lots of camera, bluetooth, av...commits.
DOWNLOAD SITES
temasek.hopto.org - i9300 / tilapia / grouper / hltexx
Dev-Host i9300 / tilapia / grouper / hltexx
AndroidFileHost - i9300 / hltexx
MediaFire- i9300
Later guys...
Enjoy
Edit: Version complète
B
Bishop- Déterminé
- Date d'inscription : 12/09/2013
Localisation : Grenoble (38)
Humeur : :-)
Messages : 274
Re: [ROM] Archive[i9300] [4.4.2] [KK] Temasek's UNOFFICIAL CM11 BUILD -V131 - 01/09/2014
Salut,
Temasek a fait une V51 Beta2 :
http://d-h.st/GAC
B :pirat:
Temasek a fait une V51 Beta2 :
http://d-h.st/GAC
B :pirat:
Bishop- Déterminé
- Date d'inscription : 12/09/2013
Localisation : Grenoble (38)
Humeur : :-)
Messages : 274
Re: [ROM] Archive[i9300] [4.4.2] [KK] Temasek's UNOFFICIAL CM11 BUILD -V131 - 01/09/2014
Salut,
V51 disponible... Tema a fermé le thread XDA mais continue le développement de sa ROM. News sur son Twitter !!!
Enjoy it !
B
V51 disponible... Tema a fermé le thread XDA mais continue le développement de sa ROM. News sur son Twitter !!!
Enjoy it !
B
Bishop- Déterminé
- Date d'inscription : 12/09/2013
Localisation : Grenoble (38)
Humeur : :-)
Messages : 274
Re: [ROM] Archive[i9300] [4.4.2] [KK] Temasek's UNOFFICIAL CM11 BUILD -V131 - 01/09/2014
_ v52.... ici
Post-it- Confirmé
- Age : 51
Date d'inscription : 23/09/2013
Messages : 7320
Re: [ROM] Archive[i9300] [4.4.2] [KK] Temasek's UNOFFICIAL CM11 BUILD -V131 - 01/09/2014
Yo Bishop, tu n'as pas donné de nouvelles de cette Rom sur * ! Enchanté de voir que ça continue de façon très "underground"!
Audebasse- Décidé
- Date d'inscription : 19/09/2013
Messages : 88
Re: [ROM] Archive[i9300] [4.4.2] [KK] Temasek's UNOFFICIAL CM11 BUILD -V131 - 01/09/2014
V53 dispo!
Nouveau lien sur XDA: http://forum.xda-developers.com/subscription.php?do=doaddsubscription&threadid=2681344
B
Nouveau lien sur XDA: http://forum.xda-developers.com/subscription.php?do=doaddsubscription&threadid=2681344
B
Dernière édition par Bishop le Lun 17 Mar - 10:47, édité 1 fois
Bishop- Déterminé
- Date d'inscription : 12/09/2013
Localisation : Grenoble (38)
Humeur : :-)
Messages : 274
Re: [ROM] Archive[i9300] [4.4.2] [KK] Temasek's UNOFFICIAL CM11 BUILD -V131 - 01/09/2014
Ne racontes pas n'importes quoi l'ami, va voir ...c'est un copier/coller de @guizmogwai sur **; donc l'infos de la V51 y est lolAudebasse a écrit:Yo Bishop, tu n'as pas donné de nouvelles de cette Rom sur * ! Enchanté de voir que ça continue de façon très "underground"!
La rom est tjrs d'actualité et MAJ regulièrement par Team!
Par contre , je crois tu n'es plus dessus au dernières nouvelles....so?!
B
Bishop- Déterminé
- Date d'inscription : 12/09/2013
Localisation : Grenoble (38)
Humeur : :-)
Messages : 274
Re: [ROM] Archive[i9300] [4.4.2] [KK] Temasek's UNOFFICIAL CM11 BUILD -V131 - 01/09/2014
Je la croyais arrêtée, au vu de ce qui était dit ! On a tellement vu ça par le passé, des Roms qui s'arrêtent d'un coup que je flippe un peu quand on parle d'arrêter !
Audebasse- Décidé
- Date d'inscription : 19/09/2013
Messages : 88
Re: [ROM] Archive[i9300] [4.4.2] [KK] Temasek's UNOFFICIAL CM11 BUILD -V131 - 01/09/2014
là n'est pas le cas...la preuve avec cette V53!Audebasse a écrit:Je la croyais arrêtée, au vu de ce qui était dit ! On a tellement vu ça par le passé, des Roms qui s'arrêtent d'un coup que je flippe un peu quand on parle d'arrêter !
De temps en temps, mare un peu de XDA, d'où ses publications sous tweeter : https://twitter.com/temasek71
voilouuu..
B
Bishop- Déterminé
- Date d'inscription : 12/09/2013
Localisation : Grenoble (38)
Humeur : :-)
Messages : 274
Re: [ROM] Archive[i9300] [4.4.2] [KK] Temasek's UNOFFICIAL CM11 BUILD -V131 - 01/09/2014
MAJ V54 dispo!
B
B
Bishop- Déterminé
- Date d'inscription : 12/09/2013
Localisation : Grenoble (38)
Humeur : :-)
Messages : 274
Re: [ROM] Archive[i9300] [4.4.2] [KK] Temasek's UNOFFICIAL CM11 BUILD -V131 - 01/09/2014
V55 dispo!
"V55 - On-the-Go, Omni smart call, disabled FC dialogs... Etc"
B ;-)
"V55 - On-the-Go, Omni smart call, disabled FC dialogs... Etc"
B ;-)
Bishop- Déterminé
- Date d'inscription : 12/09/2013
Localisation : Grenoble (38)
Humeur : :-)
Messages : 274
Page 1 sur 4 • 1, 2, 3, 4
Sujets similaires
» [N9005][4.4.4][HLTE] temasek's UNOFFICIAL CM11 BUILD
» [5.0.2][HLTE/TMO/SPR/VZW][ROM][KERNEL][CM12] Temasek's UNOFFICIAL Build [v6.2](25/01/2015)
» [4.4.4][P7510/P7500] [F2FS] CM11.0/SGT7 for P4WIFI and P4 [08/10/2014]
» [N5][4.4.2][HALO][PIE][OTA][FR]SlimKaterator Unofficial - V5.6 - 01/06/2014
» [P7500/7501/7510/7511][KK4.4.4] Rom Nameless - official build - nightlies - 18/11/2014
» [5.0.2][HLTE/TMO/SPR/VZW][ROM][KERNEL][CM12] Temasek's UNOFFICIAL Build [v6.2](25/01/2015)
» [4.4.4][P7510/P7500] [F2FS] CM11.0/SGT7 for P4WIFI and P4 [08/10/2014]
» [N5][4.4.2][HALO][PIE][OTA][FR]SlimKaterator Unofficial - V5.6 - 01/06/2014
» [P7500/7501/7510/7511][KK4.4.4] Rom Nameless - official build - nightlies - 18/11/2014
Page 1 sur 4
Permission de ce forum:
Vous ne pouvez pas répondre aux sujets dans ce forum